Characterisation of ceramic coatings sintering using residual stress measurements

被引:4
作者
Wang, X
Xiao, P [1 ]
机构
[1] Univ Manchester, Manchester Mat Sci Ctr, Manchester M1 7HS, Lancs, England
[2] UMIST, Manchester M1 7HS, Lancs, England
基金
英国工程与自然科学研究理事会;
关键词
coatings; fluorescence spectroscopy; residual stress; sintering; YSZ/Al2O3;
D O I
10.1016/S0955-2219(03)00233-4
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Yttria stabilised zirconia (YSZ) containing a few per cent of aluminium was deposited on metal substrates by using electrophoretic deposition (EPD). After sintering at 1150-1300 degreesC, YSZ matrix coatings containing isolated Al2O3 particles were produced on metal substrates. The constraint applied by metal substrates affected the sintering of the coatings. To characterise sinterability of the YSZ/Al2O3 composite coatings, the residual stress applied to the Al2O3, termed as micro-stress here, has been measured using Cr3+ fluorescence spectroscopy after the removal of metal substrates. It was found that the residual stresses increased with the increase in sintering temperature and attrition milling time. The relation between the density of the coatings and the micro-stresses can be expressed by a simple analytical equation. In addition, residual stress measurements in the coatings with the addition of cordierite glass as sintering aid further proves that the residual stress can be used to show the degree of sintering. Therefore Cr3+ fluorescence spectroscopy is a very useful technique in characterising the sintering of the YSZ/Al2O3 composite coatings. (C) 2003 Elsevier Ltd. All rights reserved.
引用
收藏
页码:283 / 288
页数:6
相关论文
共 50 条
[21]   Simulation Research on Residual Stress of Dual Ceramic Thermal Barrier Coatings for Aero-engine [J].
Wang, Min ;
Zhao, Weiwen ;
Liu, Xingyu ;
Yu, Zongjian ;
Yuan, Jianhui .
Surface Technology, 2025, 54 (03) :193-201
[22]   Residual stress profile in ceramic laminates [J].
Ortolani, M. ;
Leoni, M. ;
Scardi, P. ;
Golshan, M. .
ZEITSCHRIFT FUR KRISTALLOGRAPHIE, 2007, :91-96
[23]   Nondestructive measurements of residual stress in air plasma-sprayed thermal barrier coatings [J].
Jiang, Peng ;
Yang, Liuyu ;
Sun, Yongle ;
Li, Dingjun ;
Wang, Tiejun .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2021, 104 (03) :1455-1464
[24]   Mechanical Properties and Residual Stress Depth Profiles of Plasma Sprayed Ceramic Coatings Deposited Under Comparable Particle Temperature and Velocity [J].
Ghara, Tina ;
Bandyopadhyay, P. P. .
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2022, 31 (06) :1889-1905
[25]   Residual stresses in HVOF-sprayed ceramic coatings [J].
Bolelli, Giovanni ;
Lusvarghi, Luca ;
Varis, Tommi ;
Turunen, Erja ;
Leoni, Matteo ;
Scardi, Paolo ;
Azanza-Ricardo, Cristy Leanor ;
Barletta, Massimilano .
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (19) :4810-4819
[26]   Residual stress in electrical discharge coatings [J].
Ahmed, Nuhaize ;
Murray, James W. ;
Yuzawa, Takashi ;
Kurokawa, Toshiaki ;
Nakagawa, Takayuki ;
Sarugaku, Shun ;
Saito, Daiki ;
Clare, Adam T. .
SURFACE & COATINGS TECHNOLOGY, 2021, 416
[27]   Nanohardness and Residual Stress in TiN Coatings [J].
Carlos Hernandez, Luis ;
Ponce, Luis ;
Fundora, Abel ;
Lopez, Enrique ;
Perez, Eduardo .
MATERIALS, 2011, 4 (05) :929-940
[28]   Practical measurement of the residual stress in coatings [J].
Perry, AJ ;
Sue, JA ;
Martin, PJ .
SURFACE & COATINGS TECHNOLOGY, 1996, 81 (01) :17-28
[29]   Fabrication of ceramic composite coatings using electrophoretic deposition, reaction bonding and low temperature sintering [J].
Wang, ZH ;
Shemilt, J ;
Xiao, P .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (02) :183-189
[30]   DETERMINATION OF RESIDUAL-STRESS IN COATINGS BY A MEMBRANE DEFLECTION TECHNIQUE [J].
JENNINGS, RM ;
TAYLOR, JF ;
FARRIS, RJ .
JOURNAL OF ADHESION, 1995, 49 (1-2) :57-74