Numerical simulation of the performance of dual junction a-Si:H/a-SiGe:H solar cell with AMPS-1D

被引:0
|
作者
El Hassouani, Youssef [1 ]
Alaoui, Kaouthar Hafid [1 ]
El Idrissi, Abdellah [1 ]
El Hahioui, Mohamed [1 ]
Benami, Abdellah [2 ]
机构
[1] Univ Moulay Ismail, SIM, Dept Phys FSTE, Boutalamine BP 509, Errachidia, Morocco
[2] Univ Moulay Ismail, OTEA, Dept Phys FSTE, Errachidia, Morocco
来源
2014 INTERNATIONAL RENEWABLE AND SUSTAINABLE ENERGY CONFERENCE (IRSEC) | 2014年
关键词
Solar cell; numerical simulation; amorphous Silicon; thin film; AMPS-1D; AMORPHOUS-SILICON; EFFICIENCY;
D O I
暂无
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The aim of this work was to design solar cells with dual junction amorphous silicon/amorphous silicon germanium (a-Si:H/a-Si1-xGex:H) absorber structure. However, thin film solar cells still suffer lower conversion efficiency and need to be improved using innovative technologies. In the present work, p-a-Si:H, i-a-Si:H, i-a-Si(1-x)Gex:H and n-a-Si:H layer with the same band gaps of 1.8 eV, the thickness equal to 5 nm, 340 nm, 5 nm and 5 nm respectively, and acceptor and donor concentrations are constant and equal to 3x10(19) cm(-3) and 1x10(19) cm(-3), respectively, are optimized for obtaining efficient a-Si:H p-i-i-n solar cell by computer aided one-dimensional Analysis of Microelectronic and Photonic Structures (AMPS-1D) simulation program. To improve the performance of a-Si(1-x)Gex:H we investigate: i) the band gap effect of a-Si(1-x)Gex:H, ii) the thickness effect of a-Si(1-x)Gex:H on the conversion efficiency of solar cell. Simulation results show that considerable efficiency enhancement can be obtained.
引用
收藏
页码:701 / 704
页数:4
相关论文
共 50 条
  • [41] Numerical simulation of CuInxGa1-xSe2 solar cells by AMPS-1D
    Bouloufa, A.
    Djessas, K.
    Zegadi, A.
    THIN SOLID FILMS, 2007, 515 (15) : 6285 - 6287
  • [42] AMPS-1D Simulation Examination of the Measured Performance of a PbSe QD Tandem Solar Cell Structure
    Nguyen, N.
    Jiang, Z.
    Forgie, K.
    Nam, W. J.
    Xu, J.
    Fonash, S. J.
    2013 IEEE 39TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2013, : 300 - 302
  • [43] Characteristics of a-SiC:H/a-SiGe:H hetero-junction thin film solar cells with and without a-Si:H buffer layer at the p/i interface
    Son, Won-Ho
    Lee, Si-Hun
    Choi, Sie-Young
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2014, 28 (17):
  • [44] Effect of the n/p tunnel junction on the performance of a-Si:H/a-Si:H/μc-Si:H triple-junction solar cells
    Zheng, X. X.
    Zhang, X. D.
    Yang, S. S.
    Xu, S. Z.
    Wei, C. C.
    Zhao, Y.
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2012, 101 : 15 - 21
  • [45] Investigation of the Effect of Operating Temperature on Electrical Characteristics of a-Si:H/a-SiGe:H Hetero-Structure Solar Cells
    Jelodarian, Peyman
    Kosarian, Abdolnabi
    UKSIM FIFTH EUROPEAN MODELLING SYMPOSIUM ON COMPUTER MODELLING AND SIMULATION (EMS 2011), 2011, : 457 - 461
  • [46] Degradation Behavior of Flexible a-Si/a-SiGe/a-SiGe Triple Junction Solar Cells Irradiated with 20-350 keV Protons
    Sato, Shin-ichiro
    Beernink, Kevin
    Ohshima, Takeshi
    2012 38TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2012, : 2856 - 2861
  • [47] Numerical simulation of AlxGa1-xN/GaN hetero junction quantum well by AMPS-1D
    Zhang, K. J.
    Wan, B.
    ADVANCED RESEARCH ON MATERIAL ENGINEERING, CHEMISTRY AND BIOINFORMATICS, PTS 1 AND 2 (MECB 2011), 2011, 282-283 : 518 - +
  • [48] Simulation of graphene-GaAs Schottky barrier solar cell with AMPS-1D
    Gong, S. J.
    Peng, Q. C.
    Zhao, X. W.
    MATERIALS RESEARCH INNOVATIONS, 2015, 19 : 760 - 763
  • [49] A-Si:H and a-Si:H/μc-Si:H tandem solar cell
    Fang, Jia
    Chen, Ze
    Bai, Lisha
    Chen, Xinliang
    Wei, Changchun
    Wang, Guangcai
    Zhao, Ying
    Zhang, Xiaodan
    Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2015, 36 (06): : 1511 - 1516
  • [50] Influence of μc-Si:H tunnel recombination junction on the performance of a-Si:H/μc-Si:H tandem solar cell
    Kateb, M. N.
    Tobbeche, S.
    Merazga, A.
    OPTIK, 2017, 139 : 152 - 165