Isothermal sections of the Co-Ni-Ti system at 950 and 1000 °C

被引:3
作者
Li, Han [1 ]
Zhou, Peng [2 ]
Du, Yong [3 ]
Jin, Zhanpeng [1 ]
机构
[1] Cent S Univ, Sch Mat Sci & Engn, Changsha, Hunan, Peoples R China
[2] Hunan Univ Sci & Technol, Hunan Prov Key Def Lab High Temp Wear Resisting M, Xiangtan 411201, Peoples R China
[3] Cent S Univ, State Key Lab Powder Met, Changsha, Hunan, Peoples R China
关键词
Co-Ni-Ti ternary system; Phase diagram; XRD; EPMA; MUTUAL DIFFUSION; KINETICS; ALLOYS;
D O I
10.3139/146.111587
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The isothermal sections of the Co-Ni-Ti system at 950 and 1000 degrees C were investigated experimentally. Diffusion couples were measured by electron probe microanalysis to construct the phase relations at 950 degrees C, whereas eleven key alloys annealed at 1000 degrees C were investigated using X-ray diffraction and electron probe microanalysis. The ternary phase, tau-(Co, Ni)(3)Ti (hP24-VCo3), was observed at both temperatures. At 950 degrees C, continuous solid solutions are formed between CoTi2 and NiTi2 as well as between CoTi and NiTi. Eight 3-phase regions, i.e. Ni3Ti + (Co, Ni) Ti + tau, Ni3Ti + gamma-(Co, Ni) + tau, tau + c-Co2Ti + (Co, Ni)Ti, tau + c-Co2Ti + Co3Ti, tau + Co3Ti + gamma-(Co, Ni), c-Co2Ti + h-Co2Ti + Co3Ti, L + beta-(Ti) + (Co, Ni)Ti-2 and L + (Co, Ni)Ti-2 + (Co, Ni) Ti, were constructed at 1000 degrees C. Considerable ternary solubilities in Ni3Ti, Co3Ti and c-Co2Ti were determined.
引用
收藏
页码:105 / 112
页数:8
相关论文
共 16 条
  • [1] Determination of the CoTi congruent melting point and thermodynamic reassessment of the Co-Ti system
    Davydov, AV
    Kattner, UR
    Josell, D
    Blendell, JE
    Waterstrat, RM
    Shapiro, AJ
    Boettinger, WJ
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (09): : 2175 - 2186
  • [2] Thermodynamic modeling and optimization of the Fe-Ni-Ti system
    De Keyzer, Jozefien
    Cacciamani, Gabriele
    Dupin, Nathalie
    Wollants, Patrick
    [J]. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 2009, 33 (01): : 109 - 123
  • [3] Du Y., 1993, J PHASE EQUILIB, V14, P348
  • [4] GRYZUNOV VI, 1982, FIZ MET METALLOVED+, V54, P1118
  • [5] GRYZUNOV VI, 1983, FIZ MET METALLOVED+, V56, P194
  • [6] GRYZUNOV VI, 1980, FIZ MET METALLOVED+, V49, P1103
  • [7] GUILLERMET AF, 1987, Z METALLKD, V78, P639
  • [8] Massalski T.B., 1996, Binary Alloy Phase Diagrams, V2nd
  • [9] The temperature ranges for maximum effectiveness of grain growth inhibitors in WC-Co alloys
    Morton, CW
    Wills, DJ
    Stjernberg, K
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2005, 23 (4-6) : 287 - 293
  • [10] Nickel-based superalloys for advanced turbine engines: Chemistry, microstructure, and properties
    Pollock, TM
    Tin, S
    [J]. JOURNAL OF PROPULSION AND POWER, 2006, 22 (02) : 361 - 374