Pressure Dependence of Viscosity for Methyl Oleate and Methyl Linoleate up to 400 MPa

In this work, the conductance versus sweep frequency for AT-cut quartz crystal resonators was measured for methyl myristate, methyl oleate, and methyl linoleate under high pressure. The response of resonators immersed in methyl myristate at each temperature (313 K, 333 K, and 353 K) was obtained at pressures up to 140 MPa. The obtained values were nearly similar for both the fundamental mode and third overtone, and the obtained viscosities agreed with the literature data up to 100 MPa. For methyl oleate and methyl linoleate, the pressure dependence of the viscosity at various temperatures (293 K, 313 K, 333 K, and 353 K) was obtained up to 400 MPa. The viscosity increased exponentially in the low-pressure region with increasing pressure, but the rate of increase slowed above similar to 150 MPa and the viscosity deviated from an exponential increase. Fitting was performed using a Tait-type equation, and the deviation from the fitted value was calculated using this fitting equation. The pressure dependence of the viscosity could be obtained within 10 % of absolute average deviation (AAD) with a sample volume of similar to 2 mL using simple experimental equipment.