Introducing Fractal Dimension for Interlaminar Shear and Tensile Strength Assessment of Mechanically Interlocked Polymer-Metal Interfaces

被引：17

作者：

Saborowski, Erik ^{[1
]}

Steinert, Philipp ^{[2
]}

Dittes, Axel ^{[1
]}

Lindner, Thomas ^{[1
]}

Schubert, Andreas ^{[2
]}

Lampke, Thomas ^{[1
]}

机构：

[1] Tech Univ Chemnitz, Mat & Surface Engn Grp, Fac Mech Engn, Erfenschlager Str 73, D-09125 Chemnitz, Germany

[2] Tech Univ Chemnitz, Micromfg Technol Grp, Fac Mech Engn, Reichenhainer Str 70, D-09126 Chemnitz, Germany

来源：

MATERIALS | 2020年 / 13卷 / 09期

关键词：

fractal geometry; interlaminar tensile strength; interlaminar shear strength; strength prediction; roughness evaluation; mechanical interlocking; surface structuring; polymer-metal hybrid; laser micromachining;

D O I：

10.3390/ma13092171

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The interlaminar strength of mechanically interlocked polymer-metal interfaces is strongly dependent on the surface structure of the metal component. Therefore, this contribution assesses the suitability of the fractal dimension for quantification of the surface structure, as well as interlaminar strength prediction of aluminum/polyamide 6 polymer-metal hybrids. Seven different surface structures, manufactured by mechanical blasting, combined mechanical blasting and etching, thermal spraying, and laser ablation, are investigated. The experiments are carried out on a butt-bonded hollow cylinder testing method that allows shear and tensile strength determination with one specific specimen geometry. The fractal dimension of the metal surfaces is derived from cross-sectional images. For comparison, the surface roughness slope is determined and related to the interlaminar strength. Finally, a fracture analysis is conducted. For the investigated material combination, the experimental results indicate that the fractal dimension is an appropriate measure for predicting the interlaminar strength.

引用

页数：16

共 23 条

[21] Steinert P., 2018, IOP C SERIES MAT SCI, V373, P1
[22] Ultrasonic Welding of Aluminum Alloys to Fiber Reinforced Polymers
Wagner, Guntram
Balle, Frank
Eifler, Dietmar
[J]. ADVANCED ENGINEERING MATERIALS, 2013, 15 (09) : 792 - 803
[23] Zopp C., 2017, Technologies for Lightweight Structures, V1, P32

← 1 2 3 →