Introducing Fractal Dimension for Interlaminar Shear and Tensile Strength Assessment of Mechanically Interlocked Polymer-Metal Interfaces

被引：17

作者：

Saborowski, Erik ^{[1
]}

Steinert, Philipp ^{[2
]}

Dittes, Axel ^{[1
]}

Lindner, Thomas ^{[1
]}

Schubert, Andreas ^{[2
]}

Lampke, Thomas ^{[1
]}

机构：

[1] Tech Univ Chemnitz, Mat & Surface Engn Grp, Fac Mech Engn, Erfenschlager Str 73, D-09125 Chemnitz, Germany

[2] Tech Univ Chemnitz, Micromfg Technol Grp, Fac Mech Engn, Reichenhainer Str 70, D-09126 Chemnitz, Germany

来源：

MATERIALS | 2020年 / 13卷 / 09期

关键词：

fractal geometry; interlaminar tensile strength; interlaminar shear strength; strength prediction; roughness evaluation; mechanical interlocking; surface structuring; polymer-metal hybrid; laser micromachining;

D O I：

10.3390/ma13092171

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The interlaminar strength of mechanically interlocked polymer-metal interfaces is strongly dependent on the surface structure of the metal component. Therefore, this contribution assesses the suitability of the fractal dimension for quantification of the surface structure, as well as interlaminar strength prediction of aluminum/polyamide 6 polymer-metal hybrids. Seven different surface structures, manufactured by mechanical blasting, combined mechanical blasting and etching, thermal spraying, and laser ablation, are investigated. The experiments are carried out on a butt-bonded hollow cylinder testing method that allows shear and tensile strength determination with one specific specimen geometry. The fractal dimension of the metal surfaces is derived from cross-sectional images. For comparison, the surface roughness slope is determined and related to the interlaminar strength. Finally, a fracture analysis is conducted. For the investigated material combination, the experimental results indicate that the fractal dimension is an appropriate measure for predicting the interlaminar strength.

引用

页数：16

共 23 条

[1] Introduction of fractal dimension to adhesive strength evaluation of plasma-sprayed coatings
Amada, S
Yamada, H
[J]. SURFACE & COATINGS TECHNOLOGY, 1996, 78 (1-3) : 50 - 55
[2] Thermal joining of thermoplastic metal hybrids by means of mono- and polychromatic radiation
Amend, P.
Pfindel, S.
Schmidt, M.
[J]. LASERS IN MANUFACTURING (LIM 2013), 2013, 41 : 98 - 105
[3] Effect of ultrashort pulse laser structuring of stainless steel on laser-based heat conduction joining of polyamide steel hybrids
Amend, Philipp
Haefner, Tom
Graenitz, Michael
Roth, Stephan
Schmidt, Michael
[J]. LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016, 2016, 83 : 1130 - 1136
[4] Enhancement of adhesive joint strength by laser surface modification
Baburaj, E. G.
Starikov, D.
Evans, J.
Shafeev, G. A.
Bensaoula, A.
[J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2007, 27 (04) : 268 - 276
[5] Potential of laser-manufactured polymer-metal hybrid joints
Bergmann, Jean Pierre
Stambke, Martin
[J]. LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012), 2012, 39 : 84 - 91
[6] Chen CQL, 1999, J BIOMED MATER RES, V48, P440, DOI 10.1002/(SICI)1097-4636(1999)48:4<440::AID-JBM7>3.0.CO
[7] 2-5
[8] Haberstroh E., 2014, KMUTNB INT J APPL SC, V7, P29, DOI [10.14416/j.ijast.2014.07.002, DOI 10.14416/J.IJAST.2014.07.002]
[9] Laser direct joining of metal and plastic
Katayama, Seiji
Kawahito, Yousuke
[J]. SCRIPTA MATERIALIA, 2008, 59 (12) : 1247 - 1250
[10] Investigating the suitability of roughness parameters to assess the bond strength of polymer-metal hybrid structures with mechanical adhesion
Kleffel, Tobias
Drummer, Dietmar
[J]. COMPOSITES PART B-ENGINEERING, 2017, 117 : 20 - 25

← 1 2 3 →