Comparison of artificial neural network and linear regression models for prediction of ring spun yarn properties.: I.: Prediction of yarn tensile properties

被引:52
|
作者
Ureyen, Mustafa E. [1 ]
Gurkan, Pelin [2 ]
机构
[1] Anadolu Univ, Sch Ind Arts, Eskisehir, Turkey
[2] Ege Univ, Dept Text Engn, TR-35100 Izmir, Turkey
关键词
artificial neural network; linear regression; ring spun yarn; yarn tenacity; breaking elongation;
D O I
10.1007/s12221-008-0014-4
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
In this study artificial neural network (ANN) models have been designed to predict the ring cotton yam properties from the fiber properties measured on HVI (high volume instrument) system and the performance of ANN models have been compared with our previous statistical models based on regression analysis. Yarn count, twist and roving properties were selected as input variables as they give significant influence on yarn properties. In experimental part, a total of 180 cotton ring spun yarns were produced using 15 different blends. The four yarn counts and three twist multipliers were chosen within the range of Ne 20-35 and alpha(e) 3.8-4.6 respectively. After measuring yarn tenacity and breaking elongation, evaluations of data were performed by using ANN. Afterwards, sensitivity analysis results and coefficient of multiple determination (R-2) values of ANN and regression models were compared. Our results show that ANN is more powerful tool than the regression models.
引用
收藏
页码:87 / 91
页数:5
相关论文
共 50 条
  • [41] Comparison of Artificial Neural Network, Linear Regression and Support Vector Machine for Prediction of Solar PV Power
    Kuriakose, Ans Maria
    Kariyalil, Denny Philip
    Augusthy, Marymol
    Sarath, S.
    Jacob, Joffie
    Antony, Neenu Rose
    2020 IEEE PUNE SECTION INTERNATIONAL CONFERENCE (PUNECON), 2020, : 53 - 58
  • [42] A comparative prediction for tensile properties of ternary blended open-end rotor yarns using regression and neural network models
    Erbil, Yilmaz
    Babaarslan, Osman
    Ilhan, Ilhami
    JOURNAL OF THE TEXTILE INSTITUTE, 2018, 109 (04) : 560 - 568
  • [43] Influence of GA-BP Artificial Neural Network based on PCA Dimension Reduction in Yarn Tenacity Prediction
    Li, Xiaofeng
    Qasim, Siddiqui
    Yu, Chongwen
    ADVANCES IN TEXTILE ENGINEERING AND MATERIALS IV, 2014, 1048 : 358 - 366
  • [44] Comparative analysis of regression and artificial neural network models for wind speed prediction
    Mehmet Bilgili
    Besir Sahin
    Meteorology and Atmospheric Physics, 2010, 109 : 61 - 72
  • [45] Prediction of the physicochemical properties of woody biomass using linear prediction and artificial neural networks
    Li, Hao
    Yang, Shuangjun
    Zhao, Weiqi
    Xu, Zhihan
    Zhao, Shiyu
    Liu, Xifeng
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2016, 38 (11) : 1569 - 1573
  • [46] Comparison of response surface methodology with artificial neural network for prediction of the tensile properties of friction stir-processed surface composites
    Butola, Ravi
    Singari, Ranganath M.
    Murtaza, Qasim
    Tyagi, Lakshay
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022, 236 (01) : 126 - 137
  • [47] Prediction of Palm Oil Properties using Artificial Neural Network
    Abdullah, Salwani
    Tiong, Eow Chee
    INTERNATIONAL JOURNAL OF COMPUTER SCIENCE AND NETWORK SECURITY, 2008, 8 (08): : 101 - 106
  • [48] Artificial neural network for the prediction of the fresh properties of cementitious materials
    Charrier, Malo
    Ouellet-Plamondon, Claudiane M.
    CEMENT AND CONCRETE RESEARCH, 2022, 156
  • [49] Parametric Prediction of FDM Process to Improve Tensile Properties Using Taguchi Method and Artificial Neural Network
    Ali, Dina
    Huayier, Abdullah F.
    Enzi, Abass
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2023, 17 (04) : 130 - 138
  • [50] Prediction and Process Analysis of Tensile Properties of Sinter-Hardened Alloy Steel by Artificial Neural Network
    Tan, Zhaoqiang
    Qin, Zijun
    Zhang, Qing
    Liu, Yong
    Liu, Feng
    METALS, 2022, 12 (03)