Research on the Method of Suppressing the End Detent Force of Permanent Magnet Linear Synchronous Motor Based on Stepped Double Auxiliary Pole

被引:13
作者
Zhang, Chao [1 ]
Zhang, Liwei [1 ]
Huang, Xianjin [1 ]
Yang, Jinjing [1 ]
Shen, Lu [1 ]
机构
[1] Beijing Jiaotong Univ, Sch Elect Engn, Beijing 100044, Peoples R China
关键词
Force; Fluctuations; Permanent magnet motors; Magnetic circuits; Permanent magnets; Synchronous motors; Magnetic flux; Permanent magnet linear synchronous motor (PMLSM); stepped double auxiliary pole (SDAP); detent force; end effect;
D O I
10.1109/ACCESS.2020.3001995
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
Permanent magnet linear synchronous motors have the advantages of high thrust density, high acceleration, high speed, and high efficiency, which are widely used in CNC lathes, lithography machines, rail transportation, etc. In high-speed, high-precision servo control systems, detent force fluctuation caused by end effect can easily cause problems such as speed fluctuation, mechanical vibration and electromagnetic noise, which affect the servo performance of permanent magnet linear synchronous motors. Aiming at the detent force fluctuation caused by the end effect of permanent magnet linear synchronous motor, this paper proposes a stepped double auxiliary pole method. The method has a good suppression effect on the end normal force fluctuation and the end thrust fluctuation, which improves the servo performance of the permanent magnet linear synchronous motor in the high-precision servo system. In the traditional methods of suppressing the fluctuation of end detent force, two common methods are using a magnetic isolation aluminum plate and optimizing the auxiliary pole size. The former needs a magnetic isolation aluminum plate to connect the auxiliary pole and the primary mover. Therefore, it needs to add the connection device to connect those three parts. The connection device complicates the auxiliary pole part and increases manufacturing difficulty. The latter does not change the manufacturing process, but in the early design process, the optimum size of the auxiliary needs to be considered. Compared with these two methods, the one proposed in this paper avoids the complex structure of magnetic isolation aluminum plate, the stepped double auxiliary pole is integrated with the primary mover. Moreover, it has a fixed structure with optimum size. Therefore, the method in the paper does not change the manufacturing process, improves the strength of the initial pole structure, and reduces design period. Finally, the finite element analysis by ANSYS was performed to illustrate the correctness and effectiveness of the method.
引用
收藏
页码:112539 / 112552
页数:14
相关论文
共 23 条
  • [1] Ahmed Syed Ishtiaque, 2017, Proceedings of the ACM on Human-Computer Interaction, V1, DOI 10.1145/3134652
  • [2] Boduroglu A, 2018, 2018 XIII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), P779, DOI 10.1109/ICELMACH.2018.8507040
  • [3] Dynamic and static characteristics of a hydrostatic spindle for machine tools
    Chen, Dongju
    Fan, Jinwei
    Zhang, Feihu
    [J]. JOURNAL OF MANUFACTURING SYSTEMS, 2012, 31 (01) : 26 - 33
  • [4] Chen HQ, 2018, AEBMR ADV ECON, V56, P45
  • [5] Magnetic Field and Force Calculation in Linear Permanent-Magnet Synchronous Machines Accounting for Longitudinal End Effect
    Hu, Hengzai
    Zhao, Jing
    Liu, Xiangdong
    Guo, Youguang
    [J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2016, 63 (12) : 7632 - 7643
  • [6] Huang LR, 2014, INT C ELECTR MACH SY, P1791, DOI 10.1109/ICEMS.2014.7013772
  • [7] Suppressing the Thrust Ripple of the Permanent Magnet Linear Synchronous Motors With Different Pole Structures by Setting the Modular Primary Structures Differently
    Huang, Xuzhen
    Qian, Zhenyu
    Tan, Qiang
    Li, Jing
    Zhou, Bo
    [J]. IEEE TRANSACTIONS ON ENERGY CONVERSION, 2018, 33 (04) : 1815 - 1824
  • [8] Kim Sujeong, 2016, [The Southeast Asian Review, 동남아시아연구], V26, P1
  • [9] Detent-Force Minimization of Double-Sided Interior Permanent-Magnet Flat Linear Brushless Motor
    Kwon, Young-Shin
    Kim, Won-jong
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2016, 52 (04)
  • [10] Analytical Model of Permanent Magnet Linear Synchronous Machines Considering End Effect and Slotting Effect
    Lu, Qinfen
    Wu, Bocheng
    Yao, Yihua
    Shen, Yiming
    Jiang, Qian
    [J]. IEEE TRANSACTIONS ON ENERGY CONVERSION, 2020, 35 (01) : 139 - 148