Mechanical properties of aluminum foams ceramic coated through plasma electrolytic oxidation

被引：1

作者：

Cavuslu, F. ^{[1
,2
]}

Korkmaz, K. ^{[1
]}

Usta, M. ^{[1
,3
]}

机构：

[1] Gebze Tech Univ, Dept Mat Sci & Engn, TR-41400 Gebze, Kocaeli, Turkey

[2] Adana Sci & Technol Univ, Dept Mat Engn, TR-01250 Adana, Turkey

[3] Sci & Technol Res Council Turkey TUBITAK, Marmara Res Ctr, Mat Inst, TR-41470 Gebze, Kocaeli, Turkey

来源：

KOVOVE MATERIALY-METALLIC MATERIALS | 2019年 / 57卷 / 02期

关键词：

plasma electrolytic oxidation; aluminum foams; surface treatment; mechanical properties; COATINGS; STRENGTH; MULLITE;

D O I：

10.4149/km_2019_1_105

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Plasma electrolytic oxidation (PEO) treatment is carried out to improve the mechanical properties of the open-cell aluminum foams. Two different pore densities of open-cell aluminum foams (20 PPI and 40 PPI) were treated in an alkaline solution with a low silicate concentration at different current densities and times. The microstructure and phase composition of samples were investigated by scanning electron microscope (SEM) and X-ray diffraction (XRD) respectively. The coating thickness of the struts was increased with the increasing of treatment time. Ceramic coatings were composed of corundum, gamma alumina, and mullite phases. It was found that the compressive properties of the pore density of 20 PPI composite foams were significantly improved by using PEO treatment.

引用

页码：105 / 111

页数：7

共 50 条

[21] An investigation into the mechanical and tribological properties of plasma electrolytic oxidation and hard-anodized coatings on 6082 aluminum alloy
Malayoglu, Ugur
Tekin, Kadir C.
Malayoglu, Ufuk
Shrestha, Suman
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (24): : 7451 - 7460
[22] Effect of electrolyte on surface properties of pure titanium coated by plasma electrolytic oxidation
Shin, Ki Ryong
Ko, Young Gun
Shin, Dong Hyuk
JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 : S478 - S481
[23] Mechanical properties of titania prepared by plasma electrolytic oxidation at different voltages
Huang, Ping
Wang, Fei
Xu, Kewei
Han, Yong
SURFACE & COATINGS TECHNOLOGY, 2007, 201 (9-11) : 5168 - 5171
[24] Phase transformation in plasma electrolytic oxidation coatings on 6061 aluminum alloy
Dehnavi, Vahid
Liu, Xing Yang
Luan, Ben Li
Shoesmith, David W.
Rohani, Sohrab
SURFACE & COATINGS TECHNOLOGY, 2014, 251 : 106 - 114
[25] Wear of an aluminium alloy coated by plasma electrolytic oxidation
Trevino, M.
Garza-Montes-de-Oca, N. F.
Perez, A.
Hernandez-Rodriguez, M. A. L.
Juarez, A.
Colas, R.
SURFACE & COATINGS TECHNOLOGY, 2012, 206 (8-9) : 2213 - 2219
[26] Effect of surface nanostructuring of aluminum alloy on post plasma electrolytic oxidation
Masiha, H. R.
Bagheri, H. R.
Gheytani, M.
Aliofkhazraei, M.
Rouhaghdam, A. Sabour
Shahrabi, T.
APPLIED SURFACE SCIENCE, 2014, 317 : 962 - 969
[27] Analysis of Gaseous Products of Plasma Electrolytic Oxidation of Aluminum
Golovenko, V. A.
Kalinichenko, O. A.
Roenko, E. V.
Gurevina, N. L.
Snezhko, L. A.
SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY, 2019, 55 (02) : 191 - 196
[28] Formation of Black Ceramic Layer on Aluminum Alloy by Plasma Electrolytic Oxidation in Electrolyte Containing Na2WO4
Hwang, I. J.
Shin, K. R.
Lee, J. S.
Ko, Y. G.
Shin, D. H.
MATERIALS TRANSACTIONS, 2012, 53 (03) : 559 - 564
[29] Corrosion properties of plasma electrolytic coated samples
Taheri, Peyman
Aliofkhazraei, Mahmood
Dehghanian, Changiz
Rouhaghdam, Alireza Sabour
ANTI-CORROSION METHODS AND MATERIALS, 2007, 54 (03) : 148 - 154
[30] Effect of Current Density on Microstructure and Corrosion Behavior of Plasma Electrolytic Oxidation Coated 6063 Aluminum Alloy
Zhuang Junjie
Song Renguo
Zheng Chuanbo
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2018, 33 (06): : 1503 - 1510

← 1 2 3 4 5 →