Tensile properties of recycled carbon fibers subjected to superheated steam treatment under various conditions

被引：14
作者：
Cai, Guangbin [1 ]
Wada, Masashi [2 ]
Ohsawa, Isamu [1 ]
Kitaoka, Satoshi [2 ]
Takahashi, Jun [1 ]
机构：
[1] Univ Tokyo, Sch Engn, Dept Syst Innovat, Bunkyo Ku, 7-3-1 Hongo, Tokyo 1138656, Japan
[2] Japan Fine Ceram Ctr, Atsuta Ku, 2-4-1 Mutsuno, Nagoya, Aichi 4568587, Japan
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2020年 / 133卷
关键词：
Carbon fibers; Mechanical properties; Statistical properties/methods; Recycling; ENVIRONMENTAL ASSESSMENT; INTERFACIAL ADHESION; STRENGTH; MICROSTRUCTURE; COMPOSITES; BEHAVIOR; MODULUS; ENERGY; WASTE;
D O I：
10.1016/j.compositesa.2020.105869
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A new treatment condition involving superheated steam (SHS) was proposed to achieve optimal carbon fiber recovery with a minimal decrease in fiber strength. Unidirectional carbon fiber reinforced sheets were exposed to SHS at 650 degrees C for 1 h with the addition of N-2 or CO2 as process gas. The recovery was assessed based on mass change and using thermogravimetry and differential scanning calorimetry. The results showed that the addition of N-2 efficiently suppressed the decrease in fiber strength and achieved optimal recovery. Weibull parameters indicated that lower strength fibers tended to present a narrower strength distribution. The observation of fracture surfaces and oblique sections indicated that the presence of intrinsic defects and corrosion of surface crystallites under the oxidative condition are responsible for the deterioration of and the changes in the distribution of strength.
引用
收藏
页数：8
相关论文
共 39 条
[11]   Application of supercritical water for green recycling of epoxy-based carbon fiber reinforced plastic [J].
Kim, Young Nam ;
Kim, Young-O. ;
Kim, Seong Yun ;
Park, Min ;
Yang, Beomjoo ;
Kim, Jaewoo ;
Jung, Yong Chae .
COMPOSITES SCIENCE AND TECHNOLOGY, 2019, 173 :66-72
[12]  
Kraus Thomas, 2014, Reinforced Plastics, V58, P38, DOI 10.1016/S0034-3617(14)70251-6
[13]   Nanoscale dynamic mechanical imaging of the skin-core difference: From PAN precursors to carbon fibers [J].
Liu, Xiaofang ;
Zhu, Caizhen ;
Guo, Jing ;
Liu, Qianli ;
Dong, Haixia ;
Gu, Yizhuo ;
Liu, Ruigang ;
Zhao, Ning ;
Zhang, Zuoguang ;
Xu, Jian .
MATERIALS LETTERS, 2014, 128 :417-420
[14]   Validation of carbon fibers recycling by pyro-gasification: The influence of oxidation conditions to obtain clean fibers and promote fiber/matrix adhesion in epoxy composites [J].
Mazzocchetti, Laura ;
Benelli, Tiziana ;
D'Angelo, Emanuele ;
Leonardi, Chiara ;
Zattini, Giorgio ;
Giorgini, Loris .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2018, 112 :504-514
[15]  
McConnell Vicki P., 2010, Reinforced Plastics, V54, P33, DOI 10.1016/S0034-3617(10)70063-1
[16]   Energy and environmental assessment and reuse of fluidised bed recycled carbon fibres [J].
Meng, F. ;
McKechnie, J. ;
Turner, T. A. ;
Pickering, S. J. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2017, 100 :206-214
[17]   Oxidation behaviour and microstructure of vapour grown carbon fibres [J].
Merino, C ;
Brandl, W .
SOLID STATE SCIENCES, 2003, 5 (04) :663-668
[18]   Tensile properties of ultrahigh strength PAN-based, ultrahigh modulus pitch-based and high ductility pitch-based carbon fibers [J].
Naito, Kimiyoshi ;
Tanaka, Yoshihisa ;
Yang, Jenn-Ming ;
Kayawa, Yutaka .
CARBON, 2008, 46 (02) :189-195
[19]   The effect of gauge length on tensile strength and Weibull modulus of polyacrylonitrile (PAN)- and pitch-based carbon fibers [J].
Naito, Kimiyoshi ;
Yang, Jenn-Ming ;
Tanaka, Yoshihisa ;
Kagawa, Yutaka .
JOURNAL OF MATERIALS SCIENCE, 2012, 47 (02) :632-642
[20]   Analysis of surface oxidation behavior at 500 °C under dry air of glass-like carbon heat-treated from 1200 to 3000 °C [J].
Nakamura, Kazumasa ;
Tanabe, Yasuhiro ;
Fukushima, Manabu ;
Teranishi, Yoshikazu ;
Akatsu, Takashi ;
Yasuda, Eiichi .
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2009, 161 (1-3) :40-45
1234