A numerical model and spreadsheet interface for pumping test analysis

Curve-matching techniques have been the standard method of aquifer test analysis for several decades. A variety of techniques provide the capability of evaluating test data from confined, unconfined, leaky aquitard, and other conditions. Each technique, however, is accompanied by a set of assumptions, and evaluation of a combination of conditions can be complicated or impossible due to intractable mathematics or nonuniqueness of the solution. Numerical modeling of pumping tests provides two major advantages: (1) the user can choose which properties to calibrate and what assumptions to make; and (2) in the calibration process the user is gaining insights into the conceptual model of the flow system and uncertainties in the analysis. Routine numerical modeling of pumping tests is now practical due to computer hardware and software advances of the last decade. The RADFLOW model and spreadsheet interface presented in this paper is an easy-to-use numerical model for estimation of aquifer properties from pumping test data, Layered conceptual models and their properties are evaluated in a trial-and-error estimation procedure. The RADFLOW model can treat most combinations of confined, unconfined, leaky aquitard, partial penetration, and borehole storage conditions. RADFLOW is especially useful in stratified aquifer systems with no identifiable lateral boundaries. It has been verified to several analytical solutions and has been applied in the Snake River Plain Aquifer to develop and test conceptual models and provide estimates of aquifer properties. Because the model assumes axially symmetrical flow, it is limited to representing multiple aquifer layers that are laterally continuous.