Dynamic slant shear bond behavior between new and old concrete

被引:26
作者
Hu, Bo [1 ]
Li, Yuan [1 ]
Liu, Yan [2 ]
机构
[1] Hefei Univ Technol, Coll Civil Engn, Hefei 230009, Peoples R China
[2] Hefei Hengjia Mech & Elect Equipment Co Ltd, Hefei 230601, Peoples R China
基金
中国国家自然科学基金;
关键词
New-to-old concrete interface; Slant shear test; Strain-rate effect; Bond strength; Energy absorption capacity; COMPRESSIVE STRENGTH; SURFACE PREPARATION; SUBSTRATE; ROUGHNESS; METAKAOLIN; ADHESION; MOISTURE; IMPACT; AGENT;
D O I
10.1016/j.conbuildmat.2019.117779
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Quasi-static slant shear bond behavior of new-to-old concrete interfaces has been extensively studied. However, the interfaces might be subjected to dynamic loading during their service life. Therefore, this paper presents an experimental investigation to assess dynamic slant shear bond behavior between new and old concrete. The split Hopkinson pressure bar (SHPB) was employed to apply dynamic compressive loads to slant shear specimens. Quasi-static slant shear tests were also conducted for the purpose of comparison. Test results show that the strain rate has significant effects on failure modes, bond strength, absorption energy and interfacial cohesion and friction angles of specimens. The energy absorption capacity of a specimen in the quasi-static test can be regarded as the threshold in the SHPB test, beyond which the specimen is damaged. Failure modes and bond strength of specimens are influenced by the slant angle but not by the surface roughness and the age of interfaces. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页数:14
相关论文
共 31 条
[1]  
AbuTair AI, 1996, ACI MATER J, V93, P553
[2]  
[Anonymous], 2014, 12014 JGJ MIN HOUS U
[3]  
[Anonymous], 2013, 503672013 GB MIN HOU
[4]   IRREVERSIBLE EFFECTS OF MOISTURE ON THE EPOXY MATRIX IN GLASS-REINFORCED COMPOSITES [J].
ANTOON, MK ;
KOENIG, JL .
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 1981, 19 (02) :197-212
[5]  
ASTM International (ASTM),, 2013, C882C882M ASTM INT
[6]   Influence of substrate moisture state and roughness on interface microstructure and bond strength: Slant shear vs. pull-off testing [J].
Bentz, Dale P. ;
De la Varga, Igor ;
Munoz, Jose F. ;
Spragg, Robert P. ;
Graybeal, Benjamin A. ;
Hussey, Daniel S. ;
Jacobson, David L. ;
Jones, Scott Z. ;
LaManna, Jacob M. .
CEMENT & CONCRETE COMPOSITES, 2018, 87 :63-72
[7]   Near-to-surface properties affecting bond strength in concrete repair [J].
Courard, Luc ;
Piotrowski, Tomasz ;
Garbacz, Andrzej .
CEMENT & CONCRETE COMPOSITES, 2014, 46 :73-80
[8]   Slant shear bond strength between self compacting concrete and old concrete [J].
Diab, Ahmed M. ;
Elmoaty, Abd M. Abd Elmoaty ;
Eldin, Mohamed R. Tag .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 130 :73-82
[9]  
Santos PMD, 2011, ACI MATER J, V108, P449
[10]   Interfacial strength study between a concrete substrate and an innovative sprayed coating [J].
Eymard, Mathieu ;
Plassiard, Jean-Patrick ;
Perrotin, Pascal ;
Le Fay, Stephane .
CONSTRUCTION AND BUILDING MATERIALS, 2015, 79 :345-356