High-speed and high-precision tracking control of ultrahigh-acceleration moving-permanent-magnet linear synchronous motor

被引:21
作者
Hama, Tadashi [1 ]
Sato, Kaiji [1 ]
机构
[1] Tokyo Inst Technol, Interdisciplinary Grad Sch Sci & Engn, Midori Ku, Yokohama, Kanagawa 2268502, Japan
来源
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY | 2015年 / 40卷
关键词
Linear motor; Precision; Positioning; Control; Learning; High acceleration; High velocity; MACHINE-TOOL; DESIGN; SYSTEM;
D O I
10.1016/j.precisioneng.2014.11.005
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper describes the high-speed and high-precision tracking control of an ultrahigh-acceleration, high-velocity linear synchronous motor (LSM). The linear motor can produce a thrust force of more than 3000 N, an acceleration greater than 70 G (=686 m/s(2)), and move at a velocity of over 10 m/s. However, it has highly nonlinear characteristics, and it is difficult to provide an exact dynamic model for the controller design. Thus, a suitable controller that does not require a dynamic model in the design was selected and used for the high-precision tracking control of the linear motor. The design procedure for the suitable controller consists of two steps. In the first step, a two-degree-of-freedom controller with additional control elements was designed, and its performance was examined. The additional elements were used to suppress the negative influences characterizing permanent-magnet LSMs with cored electromagnets. The controller showed high tracking accuracy at low speed, but not at high speed. To overcome this problem, the controller was improved with a learning control element in the second step. The learning control element does not require a dynamic model in the design, and it is effective at reducing reproducible errors at high speed. The effectiveness of the controller was examined and demonstrated experimentally. The improved controller with the learning control element reduced the maximum tracking error to 1.62 mu m in the sinusoidal reference motion at a frequency of 20 Hz and an amplitude of 10 mm. (C) 2014 Elsevier Inc. All rights reserved.
引用
收藏
页码:151 / 159
页数:9
相关论文
共 23 条
  • [1] Learning feedforward control using a dilated B-spline network: Frequency domain analysis and design
    Chen, YQ
    Moore, KL
    Bahl, V
    [J]. IEEE TRANSACTIONS ON NEURAL NETWORKS, 2004, 15 (02): : 355 - 366
  • [2] Chen YQ, 2001, 2001 IEEE INTERNATIONAL SYMPOSIUM ON COMPUTATIONAL INTELLIGENCE IN ROBOTICS AND AUTOMATION, P59, DOI 10.1109/CIRA.2001.1013173
  • [3] Christof R, 2001, 3 INT S LIN DRIV IND
  • [4] Fanuc Corp, 2012, FANUC LIN MOT LIS SE
  • [5] Multi-scale Alignment and Positioning System - MAPS
    Fesperman, Ronnie
    Ozturk, Ozkan
    Hocken, Robert
    Ruben, Shalom
    Tsao, Tsu-Chin
    Phipps, James
    Lemmons, Tiffany
    Brien, John
    Caskey, Greg
    [J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2012, 36 (04): : 517 - 537
  • [6] Fukuta M, 2006, P 21 ASPE ANN M
  • [7] Kakino Y, 1996, INT J JPN S PREC ENG, V30, P295
  • [8] Kim H.-J., 2005, J MAGN SOC JAPAN, V29, P199
  • [9] Dual Servo Stage Without Mechanical Coupling for Process of Manufacture and Inspection of Flat Panel Displays Via Modular Design Approach
    Kim, Kihyun
    Cho, Young-Man
    Nam, Byoung-Uk
    Lee, Moon Gu
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2012, 13 (03) : 407 - 412
  • [10] Two Degree of Freedom Control for Nanopositioning Systems: Fundamental Limitations, Control Design, and Related Trade-offs
    Lee, Chibum
    Salapaka, Srinivasa M.
    [J]. 2009 AMERICAN CONTROL CONFERENCE, VOLS 1-9, 2009, : 1664 - 1669