A comparison of the fabric and permeability anisotropy of consolidated and sheared silty clay

This paper reports the geotechnical aspects of an experimental programme investigating the permeability of shear zones in clay-rich sediments. Oedometric and ring shear permeameters were used to investigate and compare permeability anisotropy in consolidated and sheared silty clay, to simulate the behaviour of wall-rock sediments and shear zone sediments respectively. In line with other studies, consolidated silty clay was found to have no significant permeability anisotropy, although clay fabric anisotropy was well developed. However, sheared silty clay showed an increase in permeability anisotropy (r(k)=3-16) with decreasing void ratio (e=0.8-0.4), corresponding to effective stresses of 100 kPa to 4 MPa. This level of anisotropy was retained during shearing along the unloading path, and no significant dilation or enhancement of permeability was observed.