Effect of Alteration in Pump Speed on Pump Output and Left Ventricular Filling with Continuous-Flow Left Ventricular Assist Device

Third-generation continuous-flow left ventricular assist devices (LVAD) provide reduced pulsatility flow. We examined the safe working range for LVAD pump speed and the effect on pump output and cardiac function in 13 stable outpatients with VentrAssist-LVAD (Ventracor Ltd, Australia). Pump speed was decreased from a baseline mean of 2,073 +/- 86 revolutions per minute (RPM, with corresponding mean flow of 5.59 +/- 1.18 L/min, mean +/- standard deviation) to an average low-speed of 1,835 +/- 55 RPM (corresponding flow 4.68 +/- 0.99 L/min) and up to high-speed of 2,315 +/- 66 RPM (corresponding flow 6.30 +/- 1.29 L/min). There was a strong linear relationship between alteration in speed and flow rates (r(2) = 0.89, p < 0.00001) but marked interpatient variation. Downward titration to preset minimum 1,800 RPM was achieved in 9/13 (69%) and upward titration to the preset maximum 2,400 RPM was achieved in 4/13 (31%). Upward titration was stopped due to ventricular suction or nonsustained ventricular tachycardia (VT) in 4/13 (31%). Ventricular suction or VT (in 4/13) tended to be more common in patients with poor right ventricular (RV) function (p = 0.07). In summary, pump flow is stable within a relatively small speed range and should not be altered without close monitoring due to variation in response between patients, particularly with concomitant RV impairment. ASAIO Journal 2011; 57: 495-500.