Laser surface modifications of Fe-14Cr ferritic alloy for improved corrosion performance

被引：16

作者：

Ettefagh, Ali Hemmasian ^{[1
]}

Wen, Hao ^{[1
]}

Chaichi, Ardalan ^{[1
]}

Islam, Md Imdadul ^{[1
]}

Lu, Fengyuan ^{[1
]}

Gartia, Manas ^{[1
]}

Guo, Shengmin ^{[1
]}

机构：

[1] Louisiana State Univ, Dept Mech & Ind Engn, Baton Rouge, LA 70803 USA

来源：

SURFACE & COATINGS TECHNOLOGY | 2020年 / 381卷

关键词：

Laser; Surface modification; Ferritic alloy; Corrosion; Surface scanning; Protective coating; MECHANICAL-PROPERTIES; STAINLESS-STEELS; AISI; 4130; MICROSTRUCTURE; RESISTANCE; TEMPERATURE; FABRICATION; OXIDATION; BEHAVIOR;

D O I：

10.1016/j.surfcoat.2019.125194

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Laser processing parameters of an ytterbium fiber laser were explored using a two-stage searching strategy to form an optimum surface layer on Fe-14Cr ferritic alloy samples for improved corrosion performance. With one or two passes of laser surface scanning, corrosion behavior and surface layer uniformity were investigated for different laser parameters utilizing energy-dispersive X-ray spectroscopy (EDS) and electrochemical tests in saltwater. The optimum laser processing parameters were found to be 175 w of laser power, 200 mm/s of scanning speed, and 0.025 mm of hatching space. Corrosion behavior of laser-treated samples with the optimum laser parameters was found to be 5 and 13 times better respectively than the baseline sample in 3.5 wt% NaCl water solution, in term of corrosion rate. The formation of a uniform thin oxidation layer was the main reason for the improved corrosion performance.

引用

页数：7

共 37 条

[1] Effect of high temperature post-oxidizing on tribological and corrosion behavior of plasma nitrided AISI 316 austenitic stainless steel [J].

Abedi, H. R. ;

Salehi, M. ;

Yazdkhasti, M. ;

Hemmasian-E, A. .

VACUUM, 2010, 85 (03) :443-447

[2]

[Anonymous], 2013, SINTERING APPL

[3] Surface modification of aluminum alloys with carbon nanotubes by laser surface melting [J].

Ardila-Rodriguez, L. A. ;

Menezes, B. R. C. ;

Pereira, L. A. ;

Takahashi, R. J. ;

Oliveira, A. C. ;

Travessa, D. N. .

SURFACE & COATINGS TECHNOLOGY, 2019, 377

[4] Surface modification of 316L stainless steel by laser-treated HA-PLA nanocomposite films toward enhanced biocompatibility and corrosion-resistance in vitro [J].

Asl, Shaahin Mohammadzadeh ;

Ganjali, Monireh ;

Karimi, Mohammad .

SURFACE & COATINGS TECHNOLOGY, 2019, 363 :236-243

[5] Oxidation of 310 steel in H2O/O2 mixtures at 600 °C:: the effect of water-vapour-enhanced chromium evaporation [J].

Asteman, H ;

Svensson, JE ;

Johansson, LG .

CORROSION SCIENCE, 2002, 44 (11) :2635-2649

[6] Microstructural and mechanical characterisation of Fe-14Cr-0.22Hf alloy fabricated by spark plasma sintering [J].

Auger, M. A. ;

Huang, Y. ;

Zhang, H. ;

Jones, C. A. ;

Hong, Z. ;

Moody, M. P. ;

Roberts, S. G. ;

Grant, P. S. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 762 :678-687

[7] PROTECTIVE AND NON-PROTECTIVE OXIDE FORMATION ON 304 STAINLESS-STEEL [J].

BAER, DR .

APPLIED SURFACE SCIENCE, 1981, 7 (1-2) :69-82

[8] Study of W-Co ODS coating on stainless steels by mechanical alloying [J].

Chen, Chun-Liang ;

Sutrisna .

SURFACE & COATINGS TECHNOLOGY, 2018, 350 :954-961

[9] Investigation of W-Ti ODS coating on SUS304 steel fabricated by mechanical alloying technique [J].

Chen, Chun-Liang ;

Suprianto .

SURFACE & COATINGS TECHNOLOGY, 2018, 350 :1105-1111

[10] Corrosion resistance of high-Cr oxide dispersion strengthened ferritic steels in super-critical pressurized water [J].

Cho, H. S. ;

Kimura, A. .

JOURNAL OF NUCLEAR MATERIALS, 2007, 367 :1180-1184

← 1 2 3 4 →