Semisolid microstructural evolution of (CNTs + Sip)/AZ91D powder compacts prepared from powders by cold pressing and remelting

被引:12
作者
Li, Pu-Bo [1 ]
Tan, Wan-Ting [1 ]
Gao, Mang-Mang [1 ]
Liu, Kuan-Guan [1 ]
机构
[1] Ningxia Univ, Ningxia Key Lab Photovolta Mat, Yinchuan 750021, Ningxia, Peoples R China
关键词
Semisolid microstructural evolution; Densification; Phase transformation; Coarsening behavior; AZ91D MAGNESIUM ALLOY; MECHANICAL-PROPERTIES; CARBON NANOTUBES; MATRIX COMPOSITES;
D O I
10.1007/s12598-020-01396-3
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The evolution of semisolid microstructure during partial remelting of (CNTs + Si-p)/AZ91D powder compacts prepared by cold pressing was studied. The results indicate that rapid grain coarsening is driven by the dissolution of eutectic beta phase material during the initial heating period of 0-10 min, so the AZ91D powders with fine equiaxed grains surrounded by intergranular eutectic phases evolve into compact particles. As the heating time proceeds, alpha-Mg particles were gradually separated by liquid due to the phase transformations of alpha-Mg + beta -> L and alpha-Mg -> L. The primary particles coarsened rather slowly and the as-received Mg powder evolved into nearly spheroidal particles surrounded by liquid phase after partial remelting. The in situ synthesized Mg2Sip were distributed homogeneously around the CNTs with maintained structural integrity during partial remelting. Moreover, this microstructural evolution was accompanied by densification through pore filling. An ideal semisolid ingot suitable for thixoforming can therefore be obtained by partially remelting a (CNTs + Si-p)/Mg powder compact.
引用
收藏
页码:733 / 742
页数:10
相关论文
共 30 条
[11]   Ameliorated mechanical and thermal properties of SiC reinforced Al matrix composites through hybridizing carbon nanotubes [J].
Guo, Baisong ;
Zhang, Xinming ;
Cen, Xi ;
Wang, Xinhua ;
Song, Min ;
Ni, Song ;
Yi, Jianhong ;
Shen, Tao ;
Du, Yong .
MATERIALS CHARACTERIZATION, 2018, 136 :272-280
[12]   HELICAL MICROTUBULES OF GRAPHITIC CARBON [J].
IIJIMA, S .
NATURE, 1991, 354 (6348) :56-58
[13]   Pore behaviour during semi-solid alloy compression: Insights into defect creation under pressure [J].
Kareh, K. M. ;
Lee, P. D. ;
Atwood, R. C. ;
Connolley, T. ;
Gourlay, C. M. .
SCRIPTA MATERIALIA, 2014, 89 :73-76
[14]   The effect of the addition of multiwalled carbon nanotubes on the uniform distribution of TiC nanoparticles in aluminum nanocomposites [J].
Kim, W. J. ;
Yu, Y. J. .
SCRIPTA MATERIALIA, 2014, 72-73 :25-28
[15]   Effects of mold temperature on the microstructure and tensile properties of SiCp/2024 Al-based composites fabricated via powder thixoforming [J].
Li, P. B. ;
Chen, T. J. ;
Qin, H. .
MATERIALS & DESIGN, 2016, 112 :34-45
[16]   Research on Semisolid Microstructural Evolution of 2024 Aluminum Alloy Prepared by Powder Thixoforming [J].
Li, Pubo ;
Chen, Tijun ;
Zhang, Suqing ;
Guan, Renguo .
METALS, 2015, 5 (02) :547-564
[17]   CNT reinforced light metal composites produced by melt stirring and by high pressure die casting [J].
Li, Qianqian ;
Rottmair, Christian A. ;
Singer, Robert F. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (16) :2242-2247
[18]   Phase equilibria of low-Y side in Mg-Zn-Y system at 400 °C [J].
Liu, Bo-Shu ;
Li, Hong-Xiao ;
Ren, Yu-Ping ;
Jiang, Min ;
Qin, Gao-Wu .
RARE METALS, 2020, 39 (03) :262-269
[19]   Manufacturing of cast A356 matrix composite reinforced with nano- to micrometer-sized SiC particles [J].
Mousavian, Reza Taherzadeh ;
Khosroshahi, Rasoul Azari ;
Yazdani, Sasan ;
Brabazon, Dermot .
RARE METALS, 2017, 36 (01) :46-54
[20]   Carbon nanotubes: properties and application [J].
Popov, VN .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2004, 43 (03) :61-102