Efficiency gain of low-speed axial flow rotors due to forward sweep

被引:7
作者
Vad, Janos [1 ]
Halasz, Gabor [2 ]
Benedek, Tamas [1 ]
机构
[1] Budapest Univ Technol & Econ, Dept Fluid Mech, Fac Mech Engn, H-1111 Budapest, Hungary
[2] Budapest Univ Technol & Econ, Dept Hydrodynam Syst, Fac Mech Engn, H-1111 Budapest, Hungary
关键词
Axial flow fan; efficiency improvement; forward sweep; controlled vortex design; noise reduction; BLADE SWEEP; DESIGN; SKEW;
D O I
10.1177/0957650914552817
中图分类号
O414.1 [热力学];
学科分类号
摘要
The paper aims at discovering the relationship between the spanwise gradient of blade circulation and the total efficiency gain due to forward sweep, in the case of low-speed axial flow fans, at the design point. For this purpose, an extensive set of literature data have been processed and evaluated by statistical means. A trend function has been established for quantifying the aforementioned relationship. By such means, it has been pointed out that the efficiency gain due to forward sweep tends to increase with the spanwise gradient of blade circulation. This means that the purposeful incorporation of forward sweep in the design process offers an increased potential for efficiency improvement in the case of rotors of controlled vortex design. The maximum efficiency gain has been observed to be 2% to 3%, due to an in-house developed design method. It has been noted that the efficiency improvement due to forward sweep tends to be minor for free-vortex rotors. Furthermore, the efficiency tends to deteriorate if spanwise decreasing blade circulation occurs in forward-swept rotors. Remarks have been made on the means of simultaneous reduction of loss and noise related to low-speed axial fans, for a prescribed aerodynamic performance.
引用
收藏
页码:16 / 23
页数:8
相关论文
共 48 条
[31]   Tip Flow Unsteadiness and Blade Row Interactions for a Low-Speed Compressor Rotor [J].
Lee, Daniel ;
Orkwis, Paul D. ;
Tsung, Fu-Lin ;
Magnuszewski, William ;
Noll, Christopher ;
McNulty, G. Scott .
JOURNAL OF PROPULSION AND POWER, 2013, 29 (06) :1346-1356
[32]   Forward sweep to improve the efficiency of rotor-only tube-axial fans with controlled vortex design blades [J].
Masi, Massimo ;
Castegnaro, Stefano ;
Lazzaretto, Andrea .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2016, 230 (05) :512-520
[33]   Development of novel low-speed open jet wind tunnel equipped with plenum chamber for testing of aero-rotors [J].
Singhal, Ath S. ;
Patel, R. N. ;
Jain, S. V. .
RESULTS IN ENGINEERING, 2024, 21
[34]   Combined acoustic and aerodynamic investigation of the effect of inlet geometry on tip leakage flow noise of free-inlet free-exhaust low-speed axial flow fans [J].
Benedek, Tamas ;
Vad, Janos ;
Lendvai, Balint .
APPLIED ACOUSTICS, 2022, 187
[35]   Analysis of a Wing-Fuselage Biplane with Trailing-Edge Flaps in Low-Speed Flow [J].
Duong Nguyen, Thai ;
Kashitani, Masashi ;
Kusunose, Kazuhiro ;
Taguchi, Masato ;
Takita, Yoshihiro .
JOURNAL OF AIRCRAFT, 2022, 59 (02) :350-363
[36]   An underwater piezoelectric energy harvester based on magnetic coupling adaptable to low-speed water flow [J].
Sui, Guangdong ;
Shan, Xiaobiao ;
Hou, Chengwei ;
Tian, Haigang ;
Hu, Jingtao ;
Xie, Tao .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2023, 184
[37]   Performance and flow characteristics of the optimum rotors of Betz, Joukowsky, and Glauert at low tip-speed ratio [J].
Bourhis, M. ;
Pereira, M. ;
Ravelet, F. .
PHYSICS OF FLUIDS, 2022, 34 (10)
[38]   Experimental Investigation of the Flow, Noise, and Vibration Effect on the Construction and Design of Low-Speed Wind Tunnel Structure [J].
Abdel Aziz, Salem S. ;
Moustafa, Essam B. ;
Said, Abdel-Halim Saber Salem .
MACHINES, 2023, 11 (03)
[39]   Flow stability analysis on low-speed compressor with swept rotor blades under radial inlet distortions [J].
Sun, Dakun ;
Zhu, Hengyi ;
Xu, Dengke ;
Ni, Haoyu ;
Sun, Xiaofeng .
AEROSPACE SCIENCE AND TECHNOLOGY, 2024, 152
[40]   Development of a Low-Speed High-Efficiency PMSM and Its Drive System for Electric Windlass and Mooring Winch [J].
Zhou, Gui-Hou ;
Qiao, Ming-Zhong ;
Zhang, Xiao-Feng ;
Xie, Jin-Hui ;
Hao, Qing-Liang ;
Wan, Cong ;
Zhou, Yong .
IEEE ACCESS, 2022, 10 :70620-70629