Efficiency gain of low-speed axial flow rotors due to forward sweep

被引:7
|
作者
Vad, Janos [1 ]
Halasz, Gabor [2 ]
Benedek, Tamas [1 ]
机构
[1] Budapest Univ Technol & Econ, Dept Fluid Mech, Fac Mech Engn, H-1111 Budapest, Hungary
[2] Budapest Univ Technol & Econ, Dept Hydrodynam Syst, Fac Mech Engn, H-1111 Budapest, Hungary
关键词
Axial flow fan; efficiency improvement; forward sweep; controlled vortex design; noise reduction; BLADE SWEEP; DESIGN; SKEW;
D O I
10.1177/0957650914552817
中图分类号
O414.1 [热力学];
学科分类号
摘要
The paper aims at discovering the relationship between the spanwise gradient of blade circulation and the total efficiency gain due to forward sweep, in the case of low-speed axial flow fans, at the design point. For this purpose, an extensive set of literature data have been processed and evaluated by statistical means. A trend function has been established for quantifying the aforementioned relationship. By such means, it has been pointed out that the efficiency gain due to forward sweep tends to increase with the spanwise gradient of blade circulation. This means that the purposeful incorporation of forward sweep in the design process offers an increased potential for efficiency improvement in the case of rotors of controlled vortex design. The maximum efficiency gain has been observed to be 2% to 3%, due to an in-house developed design method. It has been noted that the efficiency improvement due to forward sweep tends to be minor for free-vortex rotors. Furthermore, the efficiency tends to deteriorate if spanwise decreasing blade circulation occurs in forward-swept rotors. Remarks have been made on the means of simultaneous reduction of loss and noise related to low-speed axial fans, for a prescribed aerodynamic performance.
引用
收藏
页码:16 / 23
页数:8
相关论文
共 48 条
  • [11] Aerodynamics and Aeroacoustics of Leading Edge Serration in Low-Speed Axial Fans With Forward Skewed Blades
    Tieghi, Lorenzo
    Czwielong, Felix
    Barnabei, Valerio F.
    Ocker, Christof
    Delibra, Giovanni
    Becker, Stefan
    Corsini, Alessandro
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2024, 146 (02):
  • [12] Leakage Noise and Related Flow Pattern in a Low-Speed Axial Fan with Rotating Shroud
    Canepa, Edward
    Cattanei, Andrea
    Zecchin, Fabio Mazzocut
    INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER, 2019, 4 (03)
  • [13] Algorithmic localisation of noise sources in the tip region of a low-speed axial flow fan
    Toth, Bence
    Vad, Janos
    JOURNAL OF SOUND AND VIBRATION, 2017, 393 : 425 - 441
  • [14] Forward sweep in a four-stage high-speed axial compressor
    Braun, Michael
    Seume, Joerg R.
    PROCEEDINGS OF THE ASME TURBO EXPO 2006, VOL 6, PTS A AND B, 2006, : 141 - 152
  • [15] Large-scale unsteady flow structures in the leakage flow of a low-speed axial fan with rotating shroud
    Canepa, Edward
    Cattanei, Andrea
    Zecchin, Fabio Mazzocut
    Parodi, Davide
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2019, 102 : 1 - 19
  • [16] Instantaneous PIV data related to the leakage flow of a low-speed axial-flow fan with rotating shroud
    Canepa, Edward
    Cattanei, Andrea
    Zecchin, Fabio Mazzocut
    Parodi, Davide
    DATA IN BRIEF, 2019, 24
  • [17] A SIMPLIFIED THEORY TO JUSTIFY FORWARD SWEEP IN LOW HUB-TO-TIP RATIO AXIAL FAN
    Masi, Massimo
    Lazzaretto, Andrea
    ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 1, 2015,
  • [18] Effect of rotor deformation and blade loading on the leakage noise in low-speed axial fans
    Canepa, Edward
    Cattanei, Andrea
    Jafelice, Francesco
    Zecchin, Fabio Mazzocut
    Parodi, Davide
    JOURNAL OF SOUND AND VIBRATION, 2018, 433 : 99 - 123
  • [19] Design optimization of low-speed axial flow fan blade with three-dimensional RANS analysis
    Lee, Ki-Sang
    Kim, Kwang-Yong
    Samad, Abdus
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2008, 22 (10) : 1864 - 1869
  • [20] Design optimization of low-speed axial flow fan blade with three-dimensional RANS analysis
    Ki-Sang Lee
    Kwang-Yong Kim
    Abdus Samad
    Journal of Mechanical Science and Technology, 2008, 22 : 1864 - 1869