A model for calculating geometry factors for a mixed-mode I-II single edge notched tension specimen

被引：20

作者：

Albinmousa, Jafar ^{[2
]}

Merah, Nesar ^{[1
]}

Khan, Shafique M. A. ^{[1
]}

机构：

[1] King Fahd Univ Petr & Minerals, Dept Mech Engn, Dhahran 31261, Saudi Arabia

[2] Univ Waterloo, Dept Mech & Mechatron Engn, Waterloo, ON N2L 3G1, Canada

来源：

ENGINEERING FRACTURE MECHANICS | 2011年 / 78卷 / 18期

关键词：

SENT; Mixed mode; Geometry factors; Finite element; STRESS INTENSITY FACTORS; FRACTURE INITIATION; CORE REGION; T-STRESSES; CRITERION;

D O I：

10.1016/j.engfracmech.2011.09.005

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

In the present study, a novel approach is presented to obtain closed-form solutions for the geometry factors, which are used to determine the stress intensity factors for various configurations. A single edge notched tension specimen with an angled-crack is used as an example to demonstrate the applicability, simplicity and flexibility of the new approach. Several values for crack inclination angles, plate widths and crack lengths, including micro-cracks, are considered in the analysis. The new approach is validated through comparison with existing analytical and numerical solutions as well as experimental results. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：3300 / 3307

页数：8

共 28 条

[1]

Benthem J. P., 1973, Mechanics of fracture. Vol.1: Methods of analysis and solutions of crack problems, P131

[2] Analysis of crack growth rate based on rotation at the crack tip plastic zone [J].

Bhattacharya, A .

INTERNATIONAL JOURNAL OF FRACTURE, 1997, 83 (02) :159-165

[3]

BOWIE OL, 1970, INT J FRACT MECH, V6, P199, DOI 10.1007/BF00189828

[4]

BOWIE OL, 1973, MECH FRACT

[5] Stress intensity factors and T-stresses for offset double edge-cracked plates under mixed-mode loadings [J].

Chen, Chih-Hao ;

Wang, Chein-Lee .

INTERNATIONAL JOURNAL OF FRACTURE, 2008, 152 (02) :149-162

[6] Mode I and mixed mode fracture of polysilicon for MEMS [J].

Cho, S. W. ;

Jonnalagadda, K. ;

Chasiotis, I. .

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2007, 30 (01) :21-31

[7]

Erdogan F., 1963, J. Fluids Eng. Trans. ASME, V85, P519, DOI DOI 10.1115/1.3656897

[8] Dislocation-based semi-analytical method for calculating stress intensity factors of cracks Two-dimensional cases [J].

Feng, Xi-Qiao ;

Shi, Yun-Fei ;

Wang, Xu-Yue ;

Li, Bo ;

Yu, Shou-Wen ;

Yang, Qiang .

ENGINEERING FRACTURE MECHANICS, 2010, 77 (18) :3521-3531

[9]

Fett T, 1999, FATIGUE FRACT ENG M, V22, P301

[10] Single edge-crack stress intensity factor solutions [J].

Freese, CE ;

Baratta, FI .

ENGINEERING FRACTURE MECHANICS, 2006, 73 (05) :616-625

← 1 2 3 →