Cavitation erosion of NiAl-bronze layers generated by friction surfacing

被引：82

作者：

Hanke, Stefanie ^{[1
]}

Fischer, Alfons ^{[1
]}

Beyer, Matthias ^{[2
]}

dos Santos, Jorge ^{[2
]}

机构：

[1] Univ Duisburg Essen, Inst Product Engn Mat Sci & Engn, D-47057 Duisburg, Germany

[2] GKSS Forschungszentrum Geesthacht GmbH, Inst Mat Res Mat Mech & Joining, Solid State Joining Proc WMP, D-21502 Geesthacht, Germany

来源：

WEAR | 2011年 / 273卷 / 01期

关键词：

Friction surfacing; NiAl-bronze; Cavitation; Erosion mechanisms; ALLOY;

D O I：

10.1016/j.wear.2011.06.002

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Friction surfacing is a solid-state process, which allows deposition welding at temperatures below the melting range. For this investigation coating layers of NiAl-bronze were deposited by friction surfacing on self-mating substrates, followed by microstructural characterisation. Further, cavitation tests were performed in order to investigate wear resistance. Cavitation erosion mechanisms were analysed by means of optical and electron microscopy. All coatings show incubation periods about twice as long as those of the substrate material, while their average rate of material loss is about one half of that of the substrate. The differences in cavitation erosion resistance are due to more ductile behaviour of the coatings, as well as corrosion increasing the wear of the as-cast material. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：32 / 37

页数：6

共 44 条

[41] Corrosion performance of friction surfaced nickel aluminium bronze (NAB) alloy under erosion corrosion and salt fog environment
Rajakumar, S.
Balasubramanian, V.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2018, 53 : 21 - 26
[42] Dry sliding, slurry abrasion and cavitation erosion of composite layers reinforced by TiC fabricated in situ in cast steel and gray cast iron
Szymanski, L.
Olejnik, E.
Sobczak, J. J.
Szala, M.
Kurtyka, P.
Tokarski, T.
Janas, A.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2022, 308
[43] In-situ Manufacturing of Al7075/TiO2, Al7075/SiC and Al7075/TiO2/SiC Based Composite Layers by Friction Surfacing on Commercially Pure Aluminum
Zaree, S. R. Alavi
Khorasanian, M.
Mashak, O. Gholam
RUSSIAN JOURNAL OF NON-FERROUS METALS, 2022, 63 (02) : 237 - 245
[44] In-situ Manufacturing of Al7075/TiO2, Al7075/SiC and Al7075/TiO2/SiC Based Composite Layers by Friction Surfacing on Commercially Pure Aluminum
S. R. Alavi Zaree
M. Khorasanian
O. Gholam Mashak
Russian Journal of Non-Ferrous Metals, 2022, 63 : 237 - 245

← 1 2 3 4 5 →