Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding

被引：195

作者：

Arivazhagan, N. ^{[1
]}

Singh, Surendra ^{[1
,2
]}

Prakash, Satya ^{[1
,2
]}

Reddy, G. M. ^{[1
,3
]}

机构：

[1] VIT Univ, Sch Mech & Bldg Sci, Vellore 632014, Tamil Nadu, India

[2] Indian Inst Technol, Dept Met & Mat Engn, Roorkee, Uttar Pradesh, India

[3] Def Met & Res Lab, Hyderabad, Andhra Pradesh, India

来源：

MATERIALS & DESIGN | 2011年 / 32卷 / 05期

关键词：

AISI-4340; STEEL; CORROSION; 304-STAINLESS-STEEL; MICROSTRUCTURE; STRENGTH; BEHAVIOR; CRACKING;

D O I：

10.1016/j.matdes.2011.01.037

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents the investigations carried out to study the microstructure and mechanical properties of AISI 304 stainless steel and AISI 4140 low alloy steel joints by Gas Tungsten Arc Welding (GTAW), Electron Beam Welding (EBW) and Friction Welding (FRW). For each of the weldments, detailed analysis was conducted on the phase composition, microstructure characteristics and mechanical properties. The results of the analysis shows that the joint made by EBW has the highest tensile strength (681 MPa) than the joint made by GTAW (635 Mpa) and FRW (494 Mpa). From the fractographs, it could be observed that the ductility of the EBW and GTA weldment were higher with an elongation of 32% and 25% respectively when compared with friction weldment (19%). Moreover, the impact strength of weldment made by GTAW is higher compared to EBW and FRW. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：3036 / 3050

页数：15

共 32 条

[1]

*AM WELD SOC, 1991, WELD HDB, V2

[2] Optimization of tensile strength of ferritic/austenitic laser-welded components [J].

Anawa, E. M. ;

Olabi, A. G. .

OPTICS AND LASERS IN ENGINEERING, 2008, 46 (08) :571-577

[3]

[Anonymous], E8M03 ASTM

[4]

[Anonymous], E2304 ASTM

[5]

[Anonymous], 2007, Synthesis Report, Summary for Policymakers, P1

[6] High temperature corrosion studies on friction-welded dissimilar metals [J].

Arivazhagan, N. ;

Singh, Surendra ;

Prakash, Satya ;

Reddy, G. M. .

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2006, 132 (1-2) :222-227

[7]

Çam G, 1999, WELD J, V78, p193S

[8]

CAM G, 1998, J SCI TECH WELD JOIN, V3, P3

[9] Investigation of the mechanical properties and microstructure of friction welded joints between AISI 4140 and AISI 1050 steels [J].

Celik, Sare ;

Ersozlu, Ismail .

MATERIALS & DESIGN, 2009, 30 (04) :970-976

[10]

CHENG CJ, 1963, WELD J, V54, pS233

← 1 2 3 4 →