Ion-enhanced chemical etching of HfO2 for integration in metal-oxide-semiconductor field effect transistors

High-density chlorine plasmas were used to chemically etch HfO2, a promising high dielectric constant material, where the etch rate scaled up linearly with the square root of ion energy at energies above 50 eV. Higher etch rates were obtained at lower pressures and high microwave powers, where the electron temperature and ion densities were high. Optical emission spectroscopy and quadrupole mass spectrometry were used to identify the etching products, which are mainly highly chlorinated hafnium (HfCl3 and HfCl4) and ClO. Surface chlorination was confirmed after etching was confirmed by x-ray photoelectron spectroscopy. The addition of BCl3 in the Cl-2 plasmas was found to significantly enhance the HfO2 etch rate and improve the etching selectivity to Si from similar to0.01 in a pure Cl-2 plasma to similar to0.9 in a pure BCl3 plasma at an ion energy of 75 eV. The etching selectivity was improved to 4 as the ion energies reduced towards the etching threshold energy in a pure BCl3 plasma. BCl3 plasmas were found effective in patterning HfO2 for fabricating the metal-oxide-semiconductor field effect transistors, enabling a complete removal of HfO2 from the source and drain regions yielding high electron mobility. (C) 2003 American Vacuum Society.