Evaluation of the double-tuned functionally graded thermoelectric material approach for the fabrication of n-type leg based on Pb0.75Sn0.25Te

Thermoelectric (TE) technologies realize the generation of electrical energy from the waste heat. The one bottleneck, which significantly restricts the wide use of these technologies, relates to the low energy conversion efficiency of the commercial devices. In this work, the double-tuned functionally graded thermoelectric material (DT-FGTM) approach was proposed to achieve the high-performance TE leg through the increase in the average TE figure of merit (ZT)(ave). The essence of this idea is connected with the precise control of the bandgap E-g and chemical potential mu(c) over the entire temperature range. Considering Pb0.75Sn0.25Te solid solution, as an example, and using the three band Kane model, we evaluated the best conditions for the highest thermoelectric performance in this material. Within the offered herein DT-FGTM approach, we fabricated the thermoelectric n-type Pb0.75Sn0.25Te1-xIx leg and measured its output energy characteristics. The efficiency of energy conversion for the prepared DT-FGTM leg reaches a very high value of & SIM;12.0% at temperature difference & UDelta;T = 540 K. Furthermore, the thermal treatment of the fabricated leg should not injure the carrier concentration distribution through the leg, as the hot end of the leg is heavily doped, and the chemical diffusion between segments would be only beneficial. Our demonstration shows that the DT-FGTM approach has significant practical interest and can be utilized for the other TE materials.