Coaxial waterjet-assisted laser drilling of film cooling holes in turbine blades

被引：55
作者：
Liu, Y. Z. [1 ,2 ]
机构：
[1] Ningbo Univ Technol, Sch Mech Engn, Ningbo 315336, Peoples R China
[2] Chinese Acad Sci, Ningbo Inst Mat Technol & Engn, Ningbo 315201, Peoples R China
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2020年 / 150卷
关键词：
Coaxial waterjet-assisted laser drilling; Film cooling holes; Turbine blades; Heat affected zone (HAZ); Transmission electron microscopy (TEM); THERMAL BARRIER COATINGS; MICROSTRUCTURAL EVOLUTION; TITANIUM-ALLOY; ABLATION; FEMTOSECOND; UNDERWATER; PLASMA; ZONE;
D O I：
10.1016/j.ijmachtools.2019.103510
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Film cooling holes (FCHs) of nickel-based single crystal turbine blades were drilled by 532 nm Nd:YVO4 nanosecond laser in coaxial waterjet-assisted environment. Microstructure of the side wall of the FCHs was mainly investigated by means of transmission electron microscopy. The average thickness of heat affected zone (HAZ) around FCHs decreases with increasing of water flow rate. The main phase within HAZ evolves from beta-NiAl to beta-NiAl + gamma-Ni with the increase in the water flow rate. Some gamma-Ni particles in the HAZ twined along (111) plane. A small portion of the FCHs are free of HAZ when drilled by coaxial waterjet-assisted laser drilling at a laminar water flow rate >= 3.1 m/s. There are no processing-induced defects including HAZ, microcrack, and phase transformation around the FCHs when drilled at the water flow rate >= 5.1 m/s. The FCHs with high surface quality can be drilled by the coaxial waterjet-assisted laser drilling. Finally, effects of fluid water on drilling quality of the FCHs were discussed.
引用
收藏
页数：11
相关论文
共 44 条
[41]   Influence of plasma shock wave on the morphology of laser drilling in different environments [J].
Zhai, Zhaoyang ;
Wang, Wenjun ;
Mei, Xuesong ;
Wang, Kedian ;
Yang, Huizhu .
OPTICS COMMUNICATIONS, 2017, 390 :49-56
[42]  
Zhang W., 2006, Patent, Patent No. [US20060133752A1, 20060133752]
[43]   Heat transfer and material ablation in hybrid laser-waterjet microgrooving of single crystalline germanium [J].
Zhu, Hao ;
Wang, Jun ;
Yao, Peng ;
Huang, Chuanzhen .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2017, 116 :25-39
[44]   Laser ablation of solid substrates in water and ambient air [J].
Zhu, S ;
Lu, YF ;
Hong, MH ;
Chen, XY .
JOURNAL OF APPLIED PHYSICS, 2001, 89 (04) :2400-2403
12345