Comparative analysis of stress-strain state of bars from aluminum alloys A2024 and A7075 processed by RSR based on FEM modeling

被引：7
作者：
Gamin, Yu, V [1 ]
Koshmin, A. N. [1 ]
Kin, T. Yu [1 ]
Aleshchenko, A. S. [1 ]
机构：
[1] Natl Univ Sci & Technol MISIS NUST MISIS, Dept Met Forming, Moscow, Russia
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 46卷
基金：
俄罗斯科学基金会;
关键词：
Aluminum alloys; Radial-shear rolling; Finite element modeling; Stress-strain state; Elongation ratio;
D O I：
10.1016/j.matpr.2021.03.106
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this article the analysis of temperature conditions and stress-strain state during radial-shear rolling (RSR) of bars from industrial deformed aluminum alloys A2024 and A7075 was carried out. The RSR was made for four different variants of elongation ratio m for each alloy: 1.2, 1.6, 2.0, 2.4. It is shown that for the alloy A2024 in the zone of maximum reduction, the growth of elongation ratio leads to the increase in the temperature difference, and for A7075, the temperature difference decreases. After rolling the temperature of bar increases due to the deformation heating in average by 5-30 degrees C in dependence on reduction per pass. At deformation with m <2.0 the axis zone of bars is characterized by the presence of positive average stresses. The analysis of stress triaxiality parameter showed that the alloy A2024 has a large margin of technological plasticity in comparison with the alloy A7075 when deformed by the RSR method with similar parameter. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the 3rd International Conference on Materials, Manufacturing and Modelling.
引用
收藏
页码：8138 / 8142
页数：5
相关论文
共 20 条
  • [1] Radial-shear rolling of high-strength aluminum alloys: Finite element simulation and analysis of microstructure and mechanical properties
    Akopyan, T. K.
    Gamin, Y., V
    Galkin, S. P.
    Prosviryakov, A. S.
    Aleshchenko, A. S.
    Noshin, M. A.
    Koshmin, A. N.
    Fomin, A., V
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 786
  • [2] [Anonymous], 2003, Handbook of Aluminium
  • [3] Archakova Z.N., STRUCTURE PROPERTIES, V2nd, P1984
  • [4] Beletskiy V.M., 2005, Aluminum alloys (Composition, properties, technology, application). Directory, P365
  • [5] Grain refinement, texture, and mechanical properties of a magnesium alloy after radial-shear rolling
    Dobatkin, S.
    Galkin, S.
    Estrin, Y.
    Serebryany, V
    Diez, M.
    Martynenko, N.
    Lukyanova, E.
    Perezhogin, V
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 774 : 969 - 979
  • [6] Simulation and Experimental Evaluation of Circumferential Fracture Conditions in Hot Radial-Shear Rolling
    Galkin, S. P.
    Stebunov, S. A.
    Aleschenko, A. S.
    Vlasov, A. V.
    Patrin, P., V
    Fomin, A., V
    [J]. METALLURGIST, 2020, 64 (3-4) : 233 - 241
  • [7] Galkin S.P., 2004, Stal, V7, P63
  • [8] GALKIN S. P., 2003, STEEL TRANSL, V33, P45
  • [9] Prediction of Billet Fracture at Two-High Screw Rolling Piercing
    Gamin, Yu. V.
    Skripalenko, M. M.
    Romantsev, B. A.
    Kadach, M. V.
    [J]. METALLURGIST, 2021, 64 (9-10) : 1020 - 1028
  • [10] Studying the Influence of Radial-Shear Rolling on Thermal Deformation Conditions of A1050 Processing
    Gamin, Yu. V.
    Koshmin, A. N.
    Dolbachev, A. P.
    Galkin, S. P.
    Aleschenko, A. S.
    Kadach, M. V.
    [J]. RUSSIAN JOURNAL OF NON-FERROUS METALS, 2020, 61 (06) : 646 - 657
12