Microstructure and tensile properties of hot-rolled Fe-C-Mn-Si-Cu multiphase steel

被引：13

作者：

Lee, Hakcheol ^{[1
]}

Koh, H. J. ^{[2
]}

Seo, Chang-Hyo ^{[1
]}

Kim, Nack J. ^{[1
]}

机构：

[1] Pohang Univ Sci & Technol, Dept Mat Sci & Engn, Pohang 790784, South Korea

[2] Hyundai Steel, Technol Planning Team, Dangjin 343840, South Korea

来源：

SCRIPTA MATERIALIA | 2008年 / 59卷 / 01期

关键词：

TRIP-aided steel; hot working; rolling; tension test; ductility;

D O I：

10.1016/j.scriptamat.2008.02.030

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Cu-containing Fe-C-Si-Mn multiphase steel was fabricated by hot rolling. The microstructure of the steel becomes more homogeneous and the type of hard second-phase changes to martensite from bainite with increasing quench-finish and coiling temperatures. The precipitation of Cu-related phases is promoted by an increase in quench-finish temperature. The steel with fine distributions of particles consisting of martensite and retained austenite within the F-Cu-containing ferrite matrix shows the best combination of strength and ductility. (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：83 / 86

页数：4

共 27 条

[1] Structure and mechanical properties of DP-type and TRIP-type sheets obtained after the thermomechanical processing [J].

Adamczyk, J ;

Grajcar, A .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 162 :267-274

[2] The effect of retained austenite stability on high speed deformation behavior of TRIP steels [J].

Choi, ID ;

Kim, DM ;

Kim, SJ ;

Bruce, DM ;

Matlock, DK ;

Speer, JC .

METALS AND MATERIALS INTERNATIONAL, 2006, 12 (01) :13-19

[3] Precipitation kinetics and strengthening of a Fe-0.8wt%Cu alloy [J].

Deschamps, A ;

Militzer, M ;

Poole, WJ .

ISIJ INTERNATIONAL, 2001, 41 (02) :196-205

[4] Effect of tempering temperatures on the mechanical properties and microstructures of HSLA-100 type copper-bearing steels [J].

Dhua, SK ;

Ray, A ;

Sarma, DS .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 318 (1-2) :197-210

[5] THE INFLUENCE OF BAINITE ON RETAINED AUSTENITE CHARACTERISTICS IN SI-MN TRIP STEELS [J].

HANZAKI, AZ ;

HODGSON, PD ;

YUE, S .

ISIJ INTERNATIONAL, 1995, 35 (01) :79-85

[6] Effects of phosphorous addition on mechanical properties and retained austenite stability of 0.15C-1.5Mn-1.5Al TRIP-aided cold rolled steels [J].

Jing, Cainian ;

Suh, Dong-Woo ;

Oh, Chang-Seok ;

Wang, Zuocheng ;

Kim, Sung-Joon .

METALS AND MATERIALS INTERNATIONAL, 2007, 13 (01) :13-19

[7] Design of high performance structural alloys using second phases [J].

Kim, Nack J. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 :51-56

[8] EFFECTS OF THE CONSTITUENTS ON THE MECHANICAL-BEHAVIOR OF LOW-CARBON STEELS [J].

KIM, NJ ;

THOMAS, G .

SCRIPTA METALLURGICA, 1984, 18 (08) :817-820

[9] EFFECTS OF MORPHOLOGY ON THE MECHANICAL-BEHAVIOR OF A DUAL PHASE FE-2SI-0.1C STEEL [J].

KIM, NJ ;

THOMAS, G .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (03) :483-489

[10] Effects of coiling temperature on microstructure and mechanical properties of high-strength hot-rolled steel plates containing Cu, Cr and Ni [J].

Kim, SJ ;

Lee, CG ;

Lee, TH ;

Lee, S .

ISIJ INTERNATIONAL, 2000, 40 (07) :692-698

← 1 2 3 →