Experimental study on the liquid desiccant dehumidification performance of microencapsulated phase change materials slurry

In this study, the idea of using microencapsulated phase change materials slurry (MPCMS) as a liquid desiccant to achieve "auto internally cooled" dehumidification was verified and investigated experi-mentally. The results indicated that, the addition of MicroPCMs to LiCl solution significantly improved the dehumidification performance, the temperature-rise of the liquid desiccant could be effectively restrained, and the dehumidification performance of the MPCMS improved with the increase in the amount of MicroPCMs. When the mass concentration of the MicroPCMs reached 2.0%, the moisture removal rate and dehumidification effectiveness increased by 24.0% and 23.1%, respectively. The contribution ratio of the phase change endothermic effect of MicroPCMs to the dehumidification enhancement was 50e60%, the reduction of the MPCMS surface vapor pressure also played an important role. The impact of several factors on the dehumidification performance, including the mass concen-tration of the MicroPCMs, temperature and flow rate of the MPCMS, process air inlet state, and flow rate were analyzed. The dehumidification performance was improved most significantly when the MPCMS inlet temperature was close to the onset phase transformation temperature of the MicroPCMs. In addition, empirical correlations with mean relative deviations of 5.1% and 12.74% were proposed to predict the dehumidification effectiveness and the Sherwood number. (c) 2021 Elsevier Ltd. All rights reserved.