Time efficient stiffness model computation for a parallel haptic mechanism via the virtual joint method

被引:19
作者
Gorgulu, Ibrahimcan [1 ]
Carbone, Giuseppe [2 ]
Dede, M. I. Can [1 ]
机构
[1] Izmir Inst Technol, Urla, Turkey
[2] DIMEG Univ Calabria, Arcavacata Di Rende, Italy
关键词
Stiffness; Parallel manipulator; Virtual joint method; Haptic mechanism; MANIPULATORS; DESIGN; OPTIMIZATION;
D O I
10.1016/j.mechmachtheory.2019.103614
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Haptic devices are used for displaying a range of mechanical impedance values to the user. This impedance is regulated by a real-time control loop depending on the position information of the end-effector, which is usually acquired indirectly by using forward kinematics equations. Nevertheless, the kinematic model is insufficient to obtain accurate values if there are non-negligible compliant displacements. This gives a strong motivation for implementing a real-time stiffness model in the haptic control loop for improving its accuracy. Additionally, stiffness performance indices can be used at the design stage for enhancing the haptic devices impedance range within optimal design procedures. Fast solutions of a stiffness model are required for a real-time control as well as for decreasing the optimization time during a design process with a trade-off between accuracy and computational costs. In this study, we propose a computation time-efficient stiffness analysis of a parallel haptic device mechanism. The accuracy and computational costs of the proposed model are calculated and compared with a model that is obtained via a finite element method to demonstrate the effectiveness of the proposed approach with the desired real-time and accuracy performance. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页数:24
相关论文
共 55 条
[1]   A model-based and simulation-driven methodology for design of haptic devices [J].
Ahmad, Aftab ;
Andersson, Kjell ;
Sellgren, Ulf .
MECHATRONICS, 2014, 24 (07) :805-818
[2]   A stiffness modeling methodology for simulation-driven design of haptic devices [J].
Ahmad, Aftab ;
Andersson, Kjell ;
Sellgren, Ulf ;
Khan, Suleman .
ENGINEERING WITH COMPUTERS, 2014, 30 (01) :125-141
[3]   A large haptic device for aircraft engine maintainability [J].
Borro, D ;
Savall, J ;
Amundarain, A ;
Gil, JJ ;
García-Alonso, A ;
Matey, L .
IEEE COMPUTER GRAPHICS AND APPLICATIONS, 2004, 24 (06) :70-74
[4]   Stiffness modeling of overconstrained parallel mechanisms under considering gravity and external payloads [J].
Cao, Wen-ao ;
Ding, Huafeng ;
Zhu, Weiguo .
MECHANISM AND MACHINE THEORY, 2019, 135 :1-16
[5]   A method for stiffness modeling of 3R2T overconstrained parallel robotic mechanisms based on screw theory and strain energy [J].
Cao, Wen-ao ;
Ding, Huafeng .
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2018, 51 :10-29
[6]   A method for stiffness analysis of overconstrained parallel robotic mechanisms with Scara motion [J].
Cao, Wen-ao ;
Yang, Donghao ;
Ding, Huafeng .
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2018, 49 :426-435
[7]   A stiffness analysis for CaPaMan (CassinoParallel manipulator) [J].
Ceccarelli, M ;
Carbone, G .
MECHANISM AND MACHINE THEORY, 2002, 37 (05) :427-439
[8]  
Ceccarelli M., 2005, B POLISH ACAD SCI, V53, P9
[9]  
Chen Zhao, 2011, 2011 International Conference on Electrical and Control Engineering, P6193
[10]  
COLGATE JE, 1994, IEEE INT CONF ROBOT, P3205, DOI 10.1109/ROBOT.1994.351077