Effects of phosphorus on the δ-Ni3Nb phase precipitation and the stress rupture properties in alloy 718

被引:90
作者
Sun, WR
Guo, SR
Lee, JH
Park, NK
Yoo, YS
Choe, SJ
Hu, ZQ
机构
[1] Acad Sinica, Inst Met Res, Shenyang 110015, Peoples R China
[2] Changwon Natl Univ, Dept Met & Mat Sci, Changwon 641773, Kyungnam, South Korea
[3] Korea Inst Machinery & Mat, High Temp Mat Lab, Changwon 641010, Kyungnam, South Korea
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1998年 / 247卷 / 1-2期
关键词
superalloy; phosphorus; solidification; rupture life;
D O I
10.1016/S0921-5093(97)00753-3
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The effects of phosphorus on the phase transformation and stress rupture properties of alloy 718 were investigated. The nucleation of delta-phase, which does not contain phosphorus, was suppressed by the enrichment of phosphorus at grain boundaries. A low level of phosphorus resulted in the formation of faults-containing film-like delta-phase along the grain boundaries, while a higher level of phosphorus favored the long lath-like delta-phase precipitation. Phosphorus greatly prolonged the stress rupture life of the alloy in the range of 0.0008-0.013 wt.%, while it reduced the stress rupture life in the range of 0.013-0.049 wt.%. The effect of phosphorus on the stress rupture properties was closely related to its interaction with oxygen. Phosphorus atoms, in the range of 0.0008-0.013 wt.%, enhanced the resistance to oxygen intrusion along the grain boundaries, protected the grain boundaries from decohesion by oxygen atoms and oxidation, and subsequently prolonged the rupture life of the alloy. The protection effect of P is clearly demonstrated by the phenomenon that the crack initiation site was shifted from the surface to the center in the stress-ruptured samples with increasing addition of P. Over 0.013 wt.%, the protection effect of phosphorus is excessive and phosphorus began to display its inherent effect of damaging the grain boundary strength; the stress rupture life of the alloy was reduced accordingly. Maximum stress rupture life was thus obtained at approximate to 0.113 wt.% P. (C) 1998 Elsevier Science S.A. All rights reserved.
引用
收藏
页码:173 / 179
页数:7
相关论文
共 18 条
  • [1] BIKE D, 1995, ACTA METALL MATER, V43, P1909
  • [2] Brooks J. W., 1988, SUPERALLOYS 1988, P33
  • [3] BURKE MG, 1991, SUPERALLOYS, V718, P337
  • [4] CAO WD, 1994, SUPERALLOYS 718, 625, 706 AND VARIOUS DERIVATIVES, P463
  • [5] Chen C., 1991, SUPERALLOYS 718 625, P81, DOI 10.7449/1991/Superal-loys_1991_81_96
  • [6] THE EFFECTS OF AUSTENITIZATION TEMPERATURE AND IMPURITY CONTENT ON THE TENSILE DUCTILITY OF A CRMOV STEEL AT 500-DEGREES-C
    CHEN, SH
    TAKASUGI, T
    POPE, DP
    [J]. SCRIPTA METALLURGICA, 1982, 16 (01): : 79 - 83
  • [7] Holt R. T., 1976, International Metallurgical Reviews, V21, P1
  • [8] Hu Z.Q., 1996, Acta Metall. Sin., V9, P443
  • [9] EFFECTS OF TRACE-ELEMENTS ON MECHANICAL-PROPERTIES OF SUPERALLOYS
    MCLEAN, M
    STRANG, A
    [J]. METALS TECHNOLOGY, 1984, 11 (OCT): : 454 - 464
  • [10] TRACE-ELEMENTS IN SUPERALLOYS - AN OVERVIEW
    MEETHAM, GW
    [J]. METALS TECHNOLOGY, 1984, 11 (OCT): : 414 - 418