Effect of cross flow on the spray characteristics of an industrial feed nozzle

The spray characteristics of a scaled-down version of an industrial feed nozzle are studied in the presence of a cross flow. Aerated liquid nitrogen is injected through the nozzle to generate the spray. The aeration rate is low and held constant, while two different liquid flow rates are used to produce the spray. A nonuniform wind profile is chosen to represent the cross flow condition. The droplet diameter and velocity measurements are acquired using a phase-Doppler particle analyzer. The results of the present study indicate that the spray momentum flux determines the extent of the jet bending. The droplets are accelerated significantly in the initial jet region as a result of flashing. However, further downstream of the nozzle, the vaporization of the droplets is considered to be negligible. The size-velocity correlation changes significantly for the case where the spray is shifted due to the cross flow.