Ultrasound-Assisted Extraction of Humic Substances from Peat: Assessment of Process Efficiency and Products' Quality

Results of efficiency of obtaining humic substances (HSs) from peat in traditional alkaline extraction (TAE) and ultrasound-assisted alkaline extraction (UAAE) are presented. The influence of the duration of the process and ultrasound intensity on the efficiency of extraction of humic acids (HAs) and fulvic acids (FAs) extraction was determined. The composition of the fulvic acid fraction was examined depending on the type of eluent used. Fulvic acids were divided into fractions using columns packed with DAX-8 resin. For this process, 0.1 M NaOH and 0.5 M NH3 center dot H2O were used as eluents. For the quality assessment of specific fulvic acids fractions, spectroscopic methods (UV-Vis and FTIR) were used. Ultrasound had a positive effect on HS extraction efficiency, especially in increasing the amount of a desired hydrophobic fraction of fulvic acids (HPO). However, a negative effect of the excessive prolongation and ultrasound intensity (approximately 400 mW center dot cm(-2)) on the extraction efficiency of HPO eluted with 0.1 M NaOH solution was observed. Using peat as a raw carbon material for the HS extraction process can be used as an alternative industrial application of peat. UAAE may be considered as an alternative method to TAE, which provides a higher efficiency in HS isolation from peat.