FRICTION STIR PROCESSING EFFECT ON WEAR AND CORROSION PROPERTIES OF MILD STEEL

被引：0
|
作者：
Obaid, Abdulsalam Y. [1 ]
Alsammarraie, Amir [2 ]
Ahmed, Saad R. [2 ]
机构：
[1] Univ Fallujah, Dept Engn Affairs, Al Anbar, Iraq
[2] Univ Tikrit, Dept Mech Engn, Tikrit, Iraq
来源：
JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY | 2022年 / 17卷 / 03期
关键词：
Corrosion rate; FSP; Hardness; Microstructure; Mild steel; Tensile strength; Wear resistance; AL-ZN ALLOY; MICROSTRUCTURAL EVOLUTION; SURFACE MODIFICATION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, a comprehensive test program had been designed to investigate the effect of friction stir processing (FSP) on wear and corrosion properties of mild steel ASTM 36. FSP was performed with varying process parameters mainly spindle speed, transverse speed and axial load to optimize best processing effects. As cast and FSPed specimens were prepared for wear evaluation and others were immersed in static tap water for certain periods of time up to 360 days for corrosion behaviour. Investigations and comparative studies were performed with an optical microscopy, hardness, tensile, wear and corrosion tests. Results proved that FSP application attributed to significant improvement in hardness, tensile, corrosion rate and wear resistance properties of the tested mild steel which will contribute to extending lifetime of steel components.
引用
收藏
页码：2067 / 2079
页数：13
相关论文
共 50 条
  • [41] Study on the corrosion of copper alloy by friction stir surface processing
    Song Weiwei
    Xu, Xiaojing
    Zuo, Dunwen
    Wang, Jianli
    ANTI-CORROSION METHODS AND MATERIALS, 2016, 63 (03) : 190 - 195
  • [42] Enhancement in hardness and corrosion resistance of AISI 420 martensitic stainless steel via friction stir processing
    Pan, L.
    Kwok, C. T.
    Lo, K. H.
    SURFACE & COATINGS TECHNOLOGY, 2019, 357 : 339 - 347
  • [43] Effect of fusion and friction stir welding techniques on the microstructure, crystallographic texture and mechanical properties of mild steel
    Kumar, Lailesh
    Yazar, K. U.
    Pramanik, Sudipta
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 754 : 400 - 410
  • [44] Effect of friction stir processing passes on wear properties of Al-6061-T6 alloy
    Mehta, Krunal M.
    Badheka, Vishvesh J.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2021, 43 (04)
  • [45] Influence of Friction Stir Processing on the Friction, Wear and Corrosion Mechanisms of Solid-State Additively Manufactured 316L Duplex Stainless Steel
    Ralls, Alessandro M.
    Daroonparvar, Mohammedreza
    Kasar, Ashish K.
    Misra, Manoranjan
    Menezes, Pradeep L.
    TRIBOLOGY INTERNATIONAL, 2023, 178
  • [46] Microstructure, Tensile and Impact Toughness Properties of Friction Stir Welded Mild Steel
    Lakshminarayanan, A. K.
    Balasubramanian, V.
    Salahuddin, M.
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2010, 17 (10) : 68 - 74
  • [47] Microstructure,Tensile and Impact Toughness Properties of Friction Stir Welded Mild Steel
    A K Lakshminarayanan
    V Balasubramanian
    M Salahuddin
    JournalofIronandSteelResearch(International), 2010, 17 (10) : 68 - 74
  • [48] Friction Stir Processing of 2507 Super Duplex Stainless Steel: Microstructure and Corrosion Behaviour
    Mishra, M. K.
    Gunasekaran, G.
    Rao, A. G.
    Kashyap, B. P.
    Prabhu, N.
    FRICTION STIR WELDING AND PROCESSING IX, 2017, : 289 - 296
  • [49] Effect of Friction Stir Processing on Mechanical Properties and Wear Resistance of Tungsten Inert Gas Welded Joint of Dissimilar Aluminum Alloys
    Husain Mehdi
    R. S. Mishra
    Journal of Materials Engineering and Performance, 2021, 30 : 1926 - 1937
  • [50] Effect of Coke Size on the Mechanical and Wear Properties of Carburized Mild Steel
    Adly, Mahmoud
    El-Kashif, Emad
    Shash, Ahmed Y.
    Hamed, Ashraf
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2018, 43 (03) : 1083 - 1092
12345