共 26 条
Adsorptive desulfurization of bioethanol using activated carbon loaded with zinc oxide
被引:33
作者:
Chaichanawong, Jintawat
[1
]
Yamamoto, Takuji
[1
]
Ohmori, Takao
[1
]
Endo, Akira
[1
]
机构:
[1] Natl Inst Adv Ind Sci & Technol, Res Inst Innovat Sustainable Chem, Tsukuba, Ibaraki 3058565, Japan
关键词:
Adsorptive desulfurization;
Bioethanol;
Dimethylsulfide;
Adsorption isotherm;
Breakthrough curve;
Activated carbon;
DIMETHYL SULFIDE;
SULFUR-COMPOUNDS;
REMOVAL;
GAS;
TECHNOLOGY;
DISPERSION;
ZEOLITES;
ETHANOL;
STREAMS;
DIESEL;
D O I:
10.1016/j.cej.2010.09.020
中图分类号:
X [环境科学、安全科学];
学科分类号:
08 ;
0830 ;
摘要:
Adsorptive desulfurization of a model bioethanol that contained dimethylsulfide (DMS) as a sulfur impurity was investigated using an activated carbon loaded with zinc oxide We studied the effect of the amount of zinc oxide loaded on the activated carbon as well as the effect of the other impurities such as water acetic acid and formic acid on liquid-phase adsorption isotherms of DMS The amount of adsorbed DMS on the activated carbon loaded with 10 wt % of zinc oxide doubled as compared with the virgin activated carbon It was also revealed that the amount of DMS adsorbed on the zinc-modified activated carbon was almost unchanged by the presence of the other impurities Dynamic adsorption performance of the activated carbon was evaluated by the measurement of a packed-bed breakthrough curve (BTC) The measured BTC was fitted by a calculated BTC based on a numerical method to estimate the mass transfer parameters in the liquid-phase desulfurization process (C) 2010 Elsevier B V All rights reserved
引用
收藏
页码:218 / 224
页数:7
相关论文