Kinetics and mechanisms for the densification and grain growth of the ?-alumina fibers isothermally sintered at elevated temperatures

Understanding the densification and grain growth processes is essential for preparing dense alumina fibers with nanograins. In this study, the alumina fibers were prepared via isothermal sintering at 1200, 1300, 1400, and 1500 ? for 1-30 min. The phase, microstructure, and density of the sintered fibers were investigated using XRD, SEM, and Archimedes methods. It was found that the phase transformation during the isothermal sintering enhances the densification of Al2O3 fibers in the initial stage, while the pores generated during the phase transformation retard the densification in the later period. The kinetics and mechanisms for the densification and grain growth of the fibers were discussed based on the sintering and grain growth models. It was revealed that the densification process of the fibers sintered at 1500 ? is dominated by the lattice diffusion mechanism, while the samples sintered at 1200-1400 ? are dominated by the grain boundary diffusion mechanism. The grain growth of the Al2O3 fibers sintered at 1200-1300 ? is governed by surface-diffusion-controlled pore drag, and that sintered at 1400 ? is dominated by lattice-diffusion-controlled pore drag.