Fatigue properties of steel to aluminum transition joints produced by explosion welding

被引：28
|
作者：
Becker, Nicolas [1 ]
Gauthier, David [2 ]
Vidal, Edgar E. [3 ]
机构：
[1] Inst Soudure, 4 Blvd Henri Becquerel, F-57970 Yutz, France
[2] NobelClad, 105 Rue Freres Voisin, F-66000 Perpignan, France
[3] NobelClad, 11800 Ridge Pkwy,Ste 300, Broomfield, CO 80021 USA
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2020年 / 139卷
关键词：
Explosion welding; EXW; Transition joints; Fatigue; Steel to aluminum;
D O I：
10.1016/j.ijfatigue.2020.105736
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This manuscript presents the results of designing and testing a novel fixturing device for determining the fatigue properties of explosive bonded metals. The fatigue strength of steel to aluminum transition joints in tensile and compression stresses are presented. Additionally, shear stress for different load ratios was also studied. The stress distribution in the specimens was verified by finite element analysis. The experimental tensile/compressive fatigue results show a comparable fatigue lifetime to the recommended IIW values. The shear fatigue strength of the explosion-welded junction tested in this study is equivalent to a traditional butt welded joint.
引用
收藏
页数：13
相关论文
共 50 条
  • [31] Metallic Layered Composite Materials Produced by Explosion Welding: Structure, Properties, and Structure of the Transition Zone
    Mal'tseva, L. A.
    Tyushlyaeva, D. S.
    Mal'tseva, T. V.
    Pastukhov, M. V.
    Lozhkin, N. N.
    Inyakin, D. V.
    Marshuk, L. A.
    RUSSIAN METALLURGY, 2014, 2014 (10): : 817 - 825
  • [32] Study on the fatigue properties of SPR-bonded aluminum-steel sheet joints
    Zhao, Yangyang
    Shi, Xiao
    Wang, Wurong
    Wei, Xicheng
    International Journal of Adhesion and Adhesives, 1600, Elsevier Ltd (136):
  • [33] Fatigue Properties of Butt Welded Aluminum Alloy and Carbon Steel Joints by Friction Stirring
    Okane, M.
    Shitaka, T.
    Ishida, M.
    Chaki, T.
    Yasui, T.
    Fukumoto, M.
    6TH INTERNATIONAL CONFERENCE ON FRACTURE FATIGUE AND WEAR (FFW), 2017, 843
  • [34] Study on the fatigue properties of SPR-bonded aluminum-steel sheet joints
    Zhao, Yangyang
    Shi, Xiao
    Wang, Wurong
    Wei, Xicheng
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2025, 136
  • [35] FATIGUE-STRENGTH OF GUSSET WELDING JOINTS FOR STEEL TOWER
    NISHIDA, S
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (04): : S347 - S347
  • [36] RESEARCH INTO QUALITY OF STEEL PLATES CLAD WITH BRASS PRODUCED BY EXPLOSION WELDING
    MATVEENK.FI
    ZELICHEN.BY
    KANEVA, LF
    KOVYNEV, MV
    MULKO, GN
    SIMONOV, VA
    YAKOVLEV, IV
    STAL IN ENGLISH-USSR, 1968, (02): : 158 - &
  • [37] EVALUATING QUALITY OF STEEL PLATES CLAD WITH COPPER, PRODUCED BY EXPLOSION WELDING
    KUDINOV, VM
    AUTOMATIC WELDING USSR, 1976, 29 (05): : 35 - 38
  • [38] Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
    Ao, S.S.
    Cheng, M.P.
    Zhang, W.
    Oliveira, J.P.
    Manladan, S.M.
    Zeng, Z.
    Luo, Z.
    Ultrasonics, 2022, 121
  • [39] Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
    Ao, S. S.
    Cheng, M. P.
    Zhang, W.
    Oliveira, J. P.
    Manladan, S. M.
    Zeng, Z.
    Luo, Z.
    ULTRASONICS, 2022, 121
  • [40] Stress corrosion cracking of explosion welded steel-aluminum joints
    Czechowski, M
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2004, 55 (06): : 464 - 467
12345