FEM analysis of effect of die angle on strain and stress state in process of drawing of steel for prestressed concrete

被引：0

作者：

Pilarczyk, JW ^{[1
]}

Markowski, J ^{[1
]}

机构：

[1] Czestochowa Tech Univ, Fac Mat Proc Technol & Appl Phys, Czestochowa, Poland

来源：

METALURGIJA | 2005年 / 44卷 / 03期

关键词：

FEM analysis; process of drawing; die;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In the paper the results of a computer simulation of the drawing process of steel wires for a prestressed concrete have been presented with FEM software (Forge 2). Dies with a different die angle 2 alpha =8 degrees, 12 degrees and 18 degrees were used in the drawing process of a DB92 steel wire rod with 5,5 mm in diameter (according to Polish Standards) in five passes for final wires with 2,5 mm in diameter. After every pass mechanical properties and draw stresses were determined.

引用

页码：227 / 230

页数：4

共 3 条

[1] FEM analysis of reverse drawing process of stainless steel
Keran, Z.
Skunca, M.
Math, M.
[J]. Annals of DAAAM for 2004 & Proceedings of the 15th International DAAAM Symposium: INTELLIGNET MANUFACTURING & AUTOMATION: GLOBALISATION - TECHNOLOGY - MEN - NATURE, 2004, : 207 - 208
[2] EFFECT OF DRAWING ANGLE SIZE OF A DIE ON WIRE DRAWING AND BUNCHING PROCESS
Tittel, Viktor
Zelenay, Miroslav
Kudelas, Lubos
[J]. 21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012), 2012, : 361 - 367
[3] Damage assessment for steel structures subjected to cyclic pre-strain Part2: SEM in-situ observations clarifying the effect of stress state on damage evolution during plastic deformation
Kawabata, Tomoya
Freire, Rafael Magalhaes de Melo
Oie, Naoya
[J]. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2023, 128

← 1 →