Process Capability Analysis for Frictionally Welded Dissimilar Polymeric Materials

被引：1

作者：

Singh, Rupinder ^{[1
]}

Kumar, Ranvijay ^{[1
,2
]}

Ahuja, I. P. S. ^{[2
]}

Grover, Sandeep ^{[3
]}

机构：

[1] Guru Nanak Dev Engn Coll, Dept Prod Engn, Ludhiana 141006, Punjab, India

[2] Punjabi Univ, Dept Mech Engn, Patiala 147002, Punjab, India

[3] YMCA Univ Sci & Technol, Dept Mech Engn, Faridabad 121006, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 09期

关键词：

Process capability; FDM; Hardness; PA6; ABS; WELDING PROCESS; JOINTS; ALLOY; ABS;

D O I：

10.1016/j.matpr.2018.06.192

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Friction welding is one of the established processes for joining of similar as well as dissimilar polymer/plastics and metals. In past decade numbers of application in different areas using this process have been reported, but very limited have been reported on properties of friction welded joints of dissimilar polymer/plastic materials as far as process capability analysis is concerned. In this present work efforts have been made to perform process capability analysis for hardness obtained (for frictional welded specimens of ABS and PA6 at optimized process parameters). The work-pieces for welding of plastic based material of ABS and PA6 were prepared on FDM setup (by using feedstock filament prepared on twin screw extruder). It has been observed that the proposed process is statistically controlled with sigma value 5.74 at optimized process parametric settings. (C) 2018 Elsevier Ltd. All rights reserved.

引用

页码：18502 / 18509

页数：8

共 21 条

[1] Welding of AA1050 aluminum with AISI 304 stainless steel by rotary friction welding process [J].

Alves, Eder Paduan ;

Piorino Neto, Francisco ;

An, Chen Ying .

JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT, 2010, 2 (03) :301-306

[2]

Attallah MM, 2012, WOODHEAD PUBL MATER, P25

[3] Finite element modelling of the inertia friction welding process between dissimilar materials [J].

D'Alvise, L ;

Massoni, E ;

Walloe, SJ .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 125 :387-391

[4] Improvements of mechanical properties in dissimilar joints of HDPE and ABS via carbon nanotubes during friction stir welding process [J].

Gao, Jicheng ;

Li, Chao ;

Shilpakar, Unisha ;

Shen, Yifu .

MATERIALS & DESIGN, 2015, 86 :289-296

[5] ANALYSIS OF FRICTIONAL PHENOMENA IN FRICTION WELDING OF MILD-STEEL [J].

HEALY, JJ ;

MCMULLAN, DJ ;

BAHRANI, AS .

WEAR, 1976, 37 (02) :265-278

[6] Influences of welding parameters on the quality and creep properties of friction stir welded polyethylene plates [J].

Hoseinlaghab, Sadegh ;

Mirjavadi, Seyed Sajad ;

Sadeghian, Nasser ;

Jalili, Iraj ;

Azarbarmas, M. ;

Givi, Mohammad Kazem Besharati .

MATERIALS & DESIGN, 2015, 67 :369-378

[7]

Inaniwa S, 2013, PROCEEDINGS OF THE 1ST INTERNATIONAL JOINT SYMPOSIUM ON JOINING AND WELDING, P137

[8] Linear friction welding of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy with dissimilar microstructure [J].

Ji, Yingping ;

Chai, Zhenzhen ;

Zhao, Dalong ;

Wu, Sujun .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (04) :979-987

[9] Microstructure of friction stir welding of aluminium alloy to magnesium alloy [J].

Kostka, A. ;

Coelho, R. S. ;

dos Santos, J. ;

Pyzalla, A. R. .

SCRIPTA MATERIALIA, 2009, 60 (11) :953-956

[10] Statistical process control in machining, a case study for machine tool capability and process capability [J].

Motorcu, AR ;

Güllü, A .

MATERIALS & DESIGN, 2006, 27 (05) :364-372

← 1 2 3 →