Field testing of a novel hybrid solar assisted desiccant evaporative cooling system coupled with a vapour compression heat pump

被引:17
作者
Frein, A. [1 ]
Muschera, M. [1 ]
Scoccia, R. [1 ]
Aprile, M. [1 ]
Motta, M. [1 ]
机构
[1] Politecn Milan, Dept Energy, I-20156 Milan, Italy
关键词
Desiccant evaporative cooling (DEC); Desiccant wheel; Solar thermal; Air-conditioning; Heat pump; Monitoring; Hybrid; AIR; DEHUMIDIFICATION; PERFORMANCE; WHEELS;
D O I
10.1016/j.applthermaleng.2017.10.168
中图分类号
O414.1 [热力学];
学科分类号
摘要
The aim of this paper is to report on a two-year operational experience with a solar driven desiccant and evaporative cooling (SDEC) system coupled with a vapour compression heat pump. The main objectives are to analyse the benefits and drawbacks of this innovative hybrid SDEC system, to compare the monitoring results against the expected theoretical ones, and to assess the system's performance with respect to a reference air handling unit. The comparison focuses on the summer key operation modes using Primary Energy Ratio (PER) as indicator of the entire system performance. The results of the detailed analysis lead to the following conclusions: the specific design of the hybrid SDEC leads to high air quality, simpler control process and low electricity consumption for partial load conditions. The monitoring results show a summer mode PER 20% lower than expected due to underperformance of the desiccant wheel. Nevertheless, this innovative system is still very efficient as its PER is twice as high as the one of the considered reference system. Lastly, suggestions for optimization of the existing system through the fine-tuning of the control strategy of its main components are presented. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:830 / 846
页数:17
相关论文
共 18 条
[1]   Modelling and control optimization of a solar desiccant and evaporative cooling system using an electrical heat pump [J].
Aprile, Marcello ;
Scoccia, Rossano ;
Motta, Mario .
1ST INTERNATIONAL CONFERENCE ON SOLAR HEATING AND COOLING FOR BUILDINGS AND INDUSTRY (SHC 2012), 2012, 30 :478-489
[2]   Grey-box modelling and in situ experimental identification of desiccant rotors [J].
Aprile, Marcello ;
Motta, Mario .
APPLIED THERMAL ENGINEERING, 2013, 51 (1-2) :55-64
[3]   Energy performance evaluation of a demo solar desiccant cooling system with heat recovery for the regeneration of the adsorption material [J].
Beccali, Marco ;
Finocchiaro, Pietro ;
Nocke, Bettina .
RENEWABLE ENERGY, 2012, 44 :40-52
[4]   Energy and economic assessment of desiccant cooling systems coupled with single glazed air and hybrid PV/thermal solar collectors for applications in hot and humid climate [J].
Beccali, Marco ;
Finocchiaro, Pietro ;
Nocke, Bettina .
SOLAR ENERGY, 2009, 83 (10) :1828-1846
[5]   Experimental investigation of a solar desiccant cooling installation [J].
Bourdoukan, P. ;
Wurtz, E. ;
Joubert, P. .
SOLAR ENERGY, 2009, 83 (11) :2059-2073
[6]   Desiccant cooling air conditioning: a review [J].
Daou, K ;
Wang, RZ ;
Xia, ZZ .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2006, 10 (02) :55-77
[7]   A continuous commissioning analysis and its application to a new installed solar driven DEC system coupled with heat pump [J].
Frein, Antoine ;
Aprile, Marcello ;
Muschera, Matteo ;
Scoccia, Rossano ;
Motta, Mario .
INTERNATIONAL CONFERENCE ON SOLAR HEATING AND COOLING FOR BUILDINGS AND INDUSTRY, SHC 2014, 2015, 70 :435-444
[8]   A review of the mathematical models for predicting rotary desiccant wheel [J].
Ge, T. S. ;
Li, Y. ;
Wang, R. Z. ;
Dai, Y. J. .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2008, 12 (06) :1485-1528
[9]   Performance comparison between a solar driven rotary desiccant cooling system and conventional vapor compression system (performance study of desiccant cooling) [J].
Ge, T. S. ;
Ziegler, F. ;
Wang, R. Z. ;
Wang, H. .
APPLIED THERMAL ENGINEERING, 2010, 30 (6-7) :724-731
[10]   Micro tri-generation system for indoor air conditioning in the Mediterranean climate [J].
Henning, Hans-Martin ;
Pagano, Tullio ;
Mola, Stefano ;
Wiemken, Edo .
APPLIED THERMAL ENGINEERING, 2007, 27 (13) :2188-2194