Postharvest quality assessment of apple during storage at ambient temperature

In this study, the physical and chemical quality attributes of apples were measured experimentally during the storage after harvesting, using well-defined procedures and techniques. Overall quality index (OQi) models were formulated in terms of measured quality attributes. Firmness (F) and total soluble solids (TSS) varied from 11.88 +/- 0.25 to 7.68 +/- 0.24 N and 14.1 +/- 0.1 to 12.7 +/- 0.1 % Brix, respectively, whereas acidity and density varied from 0.163 +/- 0.003 to 0.081 +/- 0.001 % and 0.995 +/- 0.003 to 0.951 +/- 0.004 gm/cm(3), respectively. The gloss values at 45 degrees and 60 degrees angles of incidence were found to be in the range of 7.9 +/- 0.2 to 4.1 +/- 0.3 and 6.8 +/- 0.1 to 2.5 +/- 0.3, respectively whereas, the Hunter color values L, a, b were found to be in the range of 51.75 +/- 1.33 to 57.01 +/- 0.98, 24.20 +/- 0.86 to 30.12 +/- 1.13, and 19.53 +/- 1.61 to 22.96 +/- 1.12, respectively. Formulated models were validated with the sensory scores. OQi predicted by the Model ML2 was found to be in consonance with the variation in the sensory overall quality scores. The OQi, as per the model ML2, was estimated as the ratio of the product of the constant C (265.5), acidity (A), and firmness (F) to the mod of the product of Hunter color values a and b. Finally, the predicted values of OQi were correlated with the measured quality parameters to check the possibility of predicting OQi non-destructively by using any one of those measured attributes during the storage.