Investigation of contact stiffness and contact damping for magnetic storage head-disk interfaces

被引:18
作者
Shi, Xi [2 ]
Polycarpou, Andreas A. [1 ]
机构
[1] Univ Illinois, Dept Mech Sci & Engn, Urbana, IL 61801 USA
[2] Shanghai Jiao Tong Univ, Sch Mech Engn, Shanghai, Peoples R China
来源
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME | 2008年 / 130卷 / 02期
关键词
magnetic storage tribology; contact stiffness; contact damping; rough surfaces;
D O I
10.1115/1.2908901
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
As the areal density of magnetic disk storage continues to increase and head-disk spacing decreases, contact between the recording slider and the rotating media becomes imminent. In order to predict contact forces, fly-height modulations, and off-track motions, dynamic models are typically used. A critical element of these models is the contact stiffness and damping arising from the interfacial interaction between the slider and the disk. In this paper, we review different models for predicting contact stiffness based on roughness and layered media and then we report experimental data of both contact stiffness and contact damping of typical head-disk interfaces. It is found that the contact stiffness models (based on roughness alone) overpredict the contact stiffness of actual head-disk interfaces by as much as an order of magnitude. Also, it is found that the contact damping ratio is typically few percent and its behavior is substrate dependent. In addition, the effects of a molecularly thin lubricant and humidity on contact stiffness and damping were experimentally investigated and no significant effects were found.
引用
收藏
页码:1 / 9
页数:9
相关论文
共 26 条
  • [1] Quantitative imaging of nanoscale mechanical properties using hybrid nanoindentation and force modulation
    Asif, SAS
    Wahl, KJ
    Colton, RJ
    Warren, OL
    [J]. JOURNAL OF APPLIED PHYSICS, 2001, 90 (03) : 1192 - 1200
  • [2] A compact model for spherical rough contacts
    Bahrami, M
    Yovanovich, MM
    Culham, JR
    [J]. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2005, 127 (04): : 884 - 889
  • [3] The use of ultrasound in the investigation of rough surface interfaces
    Dwyer-Joyce, RS
    Drinkwater, BW
    Quinn, AM
    [J]. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2001, 123 (01): : 8 - 16
  • [4] Influence of friction damping on workpiece-fixture system dynamics and machining stability
    Fang, B
    DeVor, RE
    Kapoor, SG
    [J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2002, 124 (02): : 226 - 233
  • [5] HUMIDITY FIXED-POINTS OF BINARY SATURATED AQUEOUS-SOLUTIONS
    GREENSPAN, L
    [J]. JOURNAL OF RESEARCH OF THE NATIONAL BUREAU OF STANDARDS SECTION A-PHYSICS AND CHEMISTRY, 1977, 81 (01): : 89 - 96
  • [6] CONTACT OF NOMINALLY FLAT SURFACES
    GREENWOOD, JA
    WILLIAMSON, JB
    [J]. PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1966, 295 (1442) : 300 - +
  • [7] ELASTIC CONTACT OF ROUGH SPHERES
    GREENWOOD, JA
    TRIPP, JH
    [J]. JOURNAL OF APPLIED MECHANICS, 1967, 34 (01): : 153 - +
  • [8] Inman D.J., 1996, Engineering Vibration
  • [9] Johnson K.L., 1987, Contact mechanics