Distributed optical sensing in composite laminates

An optical fiber-based full-field strain measurement technique was used to investigate delamination growth in laminated composites. An experimental setup to load the test samples under idealized modes of delamination was used to investigate the ability to capture the shape and location of the delamination front. It is envisioned that the demonstrated approach has significant field applications in controlled laboratory settings where delaminations have to be located accurately. Furthermore, the ability of this measurement system to provide full-field strain measurements at any given pre-implanted location through the thickness overcomes the surface strain measurements obtained by digital image correlation. In order to demonstrate the technique, distributed fiber optic sensing is used to monitor the propagation of delaminations under pure mode I and II loading. Optical fibers were embedded one ply from the crack plane of both double cantilever beam and end notch flexure specimens. To establish a repeatable fabrication methodology, manufacturing techniques for embedding the optical fibers during the laminate layup process were established. Specimens with and without embedded fibers were tested to verify the fibers did not affect measured fracture toughness values. Crack lengths measured with the optical fibers compared well with true crack lengths, and measured strain distributions compared well with results from finite element analysis.