INVESTIGATION OF HARDNESS AND SURFACE ROUGHNESS IN END MILLING GLASS FIBRE REINFORCED POLYMER COMPOSITE

被引：0
|
作者：
Kumar, M. Senthil [1 ]
机构：
[1] Kumaraguru Coll Technol, Dept Aeronaut Engn, Coimbatore, Tamil Nadu, India
来源：
METALURGIJA | 2019年 / 58卷 / 1-2期
关键词：
GFRP; hardness; scanning electron microscopy (SEM); machining; wind turbine;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The increase use of glass fibre reinforced polymer (GFRP) composites in recent years has led to an increased demand for machining. Milling of glass fiber reinforced polymer (GFRP) composites becomes essential in order to enhance its surface quality. In this paper, optimization of machining parameters in milling of horizontal axis wind turbine (HAWT) blade wrapped with E-glass fiber reinforced plastics (GFRP) composites with multi-response criteria-based desirability function analysis (DFA). The machining parameters such as spindle speed (A), feed rate (13) and depth of cut (C) are optimized by considering multiple response characteristics namely surface roughness (Ra) and hardness (HB). The desirability at a high of 0,83 provides minimum surface roughness about 2,64 pm 0,7 and maximum hardness about 49,12 BH.
引用
收藏
页码：109 / 112
页数：4
相关论文
共 50 条
  • [1] Investigation of hardness and surface roughness in end milling glass fibre reinforced polymer composite
    Senthil Kumar, M.
    Metalurgija, 2019, 58 (01): : 109 - 112
  • [2] Investigation of delamination and surface roughness in end milling of glass fibre reinforced polymer composites using Fuzzy Model and Grey wolf Optimizer
    Priya, I. Infanta Mary
    Palanikumar, K.
    Senthilkumar, N.
    Prabha, P. Siva
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (02): : 749 - 769
  • [3] Investigation of delamination and surface roughness in end milling of glass fibre reinforced polymer composites using Fuzzy Model and Grey wolf Optimizer
    I. Infanta Mary Priya
    K. Palanikumar
    N. Senthilkumar
    P. Siva Prabha
    International Journal on Interactive Design and Manufacturing (IJIDeM), 2024, 18 : 749 - 769
  • [4] INVESTIGATION OF THE CUTTING FORCES AND SURFACE ROUGHNESS IN MILLING CARBON-FIBER-REINFORCED POLYMER COMPOSITE MATERIAL
    Bayraktar, Senol
    Turgut, Yakup
    MATERIALI IN TEHNOLOGIJE, 2016, 50 (04): : 591 - 600
  • [5] The effect of manufacturing parameters on the surface roughness of glass fibre reinforced polymer moulds
    Mohammadi, M. Shah
    Ghani, M.
    Komeili, M.
    Crawford, B.
    Milani, A. S.
    COMPOSITES PART B-ENGINEERING, 2017, 125 : 39 - 48
  • [6] Prediction of surface roughness in cylindrical grinding of glass fibre reinforced epoxy composite
    Rudrapati R.
    International Journal of Machining and Machinability of Materials, 2022, 24 (06) : 405 - 418
  • [7] Machinability study of glass fibre-reinforced polymer composites during end milling
    Azmi, A. I.
    Lin, R. J. T.
    Bhattacharyya, D.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 64 (1-4): : 247 - 261
  • [8] Machinability study of glass fibre-reinforced polymer composites during end milling
    A. I. Azmi
    R. J. T. Lin
    D. Bhattacharyya
    The International Journal of Advanced Manufacturing Technology, 2013, 64 : 247 - 261
  • [9] Parametric Study of End Milling Glass Fibre Reinforced Composites
    Azmi, Azwan I.
    Lin, Richard J. T.
    Bhattacharyya, Debes
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 1083 - 1088
  • [10] Roughness modelling analysis for milling of carbon fibre reinforced polymer composites
    Wang, H.
    Sun, J.
    Li, J.
    Li, W.
    MATERIALS TECHNOLOGY, 2015, 30 (A1) : A46 - A50
12345