Dense-phase pneumatic conveying of slush ice through plastic pipes

被引:0
作者
Sheer, T. J. [1 ]
机构
[1] Univ Witwatersrand, Sch Mech Ind & Aeronaut Engn, Johannesburg, South Africa
关键词
flow transition; gas-solid flow; ice; plug flow; pneumatic conveying; slush ice;
D O I
10.1080/02726350802029007
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Ice is being used in certain deep mines to transport refrigeration to underground areas. Research has been carried out previously into the pipeline conveying characteristics of ice with air, but there remains a lack of knowledge about some aspects of this complex flow. Previous articles (Sheer, 1995; Sheer et al., 2001) have described experimental results on the pneumatic conveying of ice in particulate form ("hard" ice) through successive long horizontal and vertical sections of pipelines into mines. More recent research has been carried out to determine the conveying characteristics of "slush" ice that resembles wet snow, with an ice mass fraction range of 65-75%. Laboratory pneumatic conveying tests with slush ice were conducted through three horizontal plastic pipelines with inner diameters of 43, 54, and 69 mm, each pipeline being approximately 50m long and including various bends. The tests yielded numerical and photographic data that were used to investigate the conveying characteristics of slush ice (including flow regime transition to plug flow and pressure gradients) and to compare them with the previous results for particulate ice. It was found that the conveying characteristics of the slush depend strongly on the water content. Correlations are proposed for multiphase friction factors.
引用
收藏
页码:273 / 284
页数:12
相关论文
共 50 条
[1]   Dense-phase pneumatic conveying under pressure in horizontal pipeline [J].
Yang, Daoye ;
Zhou, Bin ;
Xu, Chuanlong ;
Wang, Shimin .
PARTICUOLOGY, 2011, 9 (04) :432-440
[2]   Investigating Straight-Pipe Pneumatic Conveying Characteristics for Fluidized Dense-Phase Pneumatic Conveying [J].
Bansal, A. ;
Mallick, S. S. ;
Wypych, P. W. .
PARTICULATE SCIENCE AND TECHNOLOGY, 2013, 31 (04) :348-356
[3]   Modeling Solids Friction for Dense-Phase Pneumatic Conveying of Powders [J].
Mallick, S. S. ;
Wypych, P. W. .
PARTICULATE SCIENCE AND TECHNOLOGY, 2009, 27 (05) :444-455
[4]   Numerical simulation of dense-phase pneumatic transport of powder in horizontal pipes [J].
Miao, Zhen ;
Kuang, Shibo ;
Zughbi, Habib ;
Yu, Aibing .
POWDER TECHNOLOGY, 2020, 361 (361) :62-73
[5]   Resistance Characteristics of Pressure Letdown in Dense-Phase Pneumatic Conveying [J].
Liang, Cai ;
Hu, Jiawei ;
Liu, Hengyu ;
Shen, Liu ;
Yuan, Gaoyang ;
Chen, Xiaoping ;
Zhao, Changsui .
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2016, 49 (06) :511-518
[6]   Modelling solids friction for fluidized dense-phase pneumatic conveying [J].
Sharma, Kapil ;
Mallick, Soumya. S. ;
Mittal, Anu ;
Wypych, Peter .
PARTICULATE SCIENCE AND TECHNOLOGY, 2020, 38 (04) :391-403
[7]   Comparison of pressure drops through different bends in dense-phase pneumatic conveying system at high pressure [J].
Liang Cai ;
Shen Liu ;
Xu Pan ;
Xu Guiling ;
Yuan Gaoyang ;
Chen Xiaoping ;
Zhao Changsui .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2014, 57 :11-19
[8]   Study on the dense-phase pneumatic conveying of fly ash and process control [J].
Zhao, J ;
Hu, SG ;
Lu, HD ;
Liu, ZM .
ICEMI'2003: PROCEEDINGS OF THE SIXTH INTERNATIONAL CONFERENCE ON ELECTRONIC MEASUREMENT & INSTRUMENTS, VOLS 1-3, 2003, :2256-2259
[9]   Dense-phase pneumatic conveying characteristics of blendings with petroleum coke and anthracite [J].
Hu J. ;
Shen L. ;
Liang C. ;
Chen X. ;
Xu G. ;
Zhao C. .
Liang, Cai (liangc@seu.edu.cn), 2016, Central South University of Technology (47) :2501-2506
[10]   An Investigation into Modeling of Solids Friction for Dense-Phase Pneumatic Conveying of Powders [J].
Mallick, S. S. ;
Wypych, P. W. .
PARTICULATE SCIENCE AND TECHNOLOGY, 2010, 28 (01) :51-66