Improvement of fibre-matrix-adhesion of natural fibres by chemical treatment

Plastics, also called synthetic polymers, are playing an important role in daily living. To raise more applications it is necessary to modify known polymeric systems to reach improved materials/material systems. A possibility to create new optimised materials out of neat polymers is offered by compounding them with different filling material. Besides chemical modification of polymers, mixing, combining or use of different fillers, one possibility is given by the composite technique, whereas the combination of the polymeric matrix and the embedded reinforcement (e.g. fibre) are yielding in optimised materials adjusted to the required properties. Concerning the polymeric matrix, either thermoplastic or thermoset material can be used. In case of the reinforcement, either synthetic (carbon-, glass- or polymeric fibres) or natural fibres are introduced to composites. To obtain an appropriate adhesion of the matrix to the reinforcement system, synthetic fibres are equipped with an avivage. For natural fibres, there are no such materials available and the hydrophilic property of this system surface prevents an adhesion to hydrophobic polymers, as well as to sizings. in this paper, ways are shown to modify the natural fibres via chemical treatment to yield higher physical properties at better adhesion. Also we will explain activities on the use of natural fibres as reaction systems and processing tools as well as the attempt to isolate the different compounds of the neat fibre via selective work-up.