Physical and chemical changes in coal fly ash during acidic or neutral wastes treatment, and its' effect on the fixation process

Coal fly ash (FA) is an abundant commodity in many countries using steam coal for power production. In some countries (e.g. Israel) all the FA is utilized whereas in some countries only low percentage is used (e.g. USA). The main mode of utilization is in the civil engineering industries as cement or clinker additive or for concrete production. In Israel (2014) 1.3 Mt of highly basic type F FA has been produced, mostly from South African and Colombian coals, in the utilities. A potential application for type F FA could be as an efficient scrubber for hazardous acidic wastes (e.g. the phosphate industry). The scrubbing efficiency of FA stems from interactions of the aluminosilicate surface of the particles with trace elements or with fine precipitates of ionic solids (e.g. SrCO3). The process changes the chemical and physical nature of the FA surface. These changes have been studied using SEM, TEM, XRD and particle size measurements of non-treated, compared to treated FA with acidic or neutral aqueous solutions. The results indicate that an appreciable part of the outer lime layer and part of the glassy aluminosilicate material is dissolved, revealing the mullite skeleton as well as Ti, and Fe species. Moreover, formation of mixed ettringite/thaumasite and halite particles is observed. Thus, this study can lead to a better understanding of the fixation mechanisms of the trace elements by coal FA. (C) 2016 Elsevier Ltd. All rights reserved.