Numerical sensitivity study of thermal response tests

Thermal conductivity and thermal borehole resistance are basic parameters for the technical and sustainable design of closed ground source heat pump (GSHP) systems. One of the most common methods to determine these parameters is the thermal response test (TRT). The response data measured are typically evaluated by the Kelvin line source equation which does not consider all relevant processes of heat transfer in the subsurface. The approach only considers conductive heat transfer from the borehole heat exchanger (BHE) and all transport effects are combined in the parameters of effective thermal conductivity and thermal borehole resistance. In order to examine primary effects in more detail, a sensitivity study based on numerically generated TRT data sets is performed considering the effects of (1) the in-situ position of the U-shaped pipes of borehole heat exchangers (shank spacing), (2) a non-uniform initial thermal distribution (such as a geothermal gradient), and (3) thermal dispersivity. It will be demonstrated that the shank spacing and the non-uniform initial thermal distribution have minor effects (less than 10%) on the effective thermal conductivity and the determined borehole resistance. Constant groundwater velocity with varying thermal dispersivity values, however, has a significant influence on the thermal borehole resistance. These effects are even more pronounced for interpreted effective thermal conductivity which is overestimated by a factor of 1.2-2.9 compared to the real thermal conductivity of the saturated porous media. (C) 2011 Elsevier Ltd. All rights reserved.