Influence of oxides on high velocity arc sprayed Fe-Al/Cr3C2 composite coatings

被引：12
|
作者：
Xu, BS [1 ]
Zhang, W
Xu, WP
机构：
[1] Acad Armed Forces Engn, Natl Key Lab Remfg, Beijing 100072, Peoples R China
[2] Shanghai Jiao Tong Univ, Sch Mat Sci & Engn, Shanghai 200030, Peoples R China
来源：
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY | 2005年 / 12卷 / 03期
基金：
中国国家自然科学基金;
关键词：
oxides; Fe-Al/Cr3C2; coating; arc sprayed; corrosion resistance; wear property;
D O I：
10.1007/s11771-005-0139-1
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Fe-Al/Cr3C2 coatings were sprayed on low steel by high velocity arc spraying(HVAS) technology. The influences of oxides on erosion, corrosion and wear behavior for high velocity arc sprayed Fe-Al/Cr3C2 coatings were studied. The results show that HVAS-sprayed Fe-Al/Cr3C2 coatings have good erosion, heat corrosion and wear resistance. The erosion resistance improves with the increase of the temperature. On one hand, the ferrous oxides are incompact, so they peel off the surface of the coatings easily during the high temperature erosion. On the other hand, compact Al2O3 films on the surface can protect the coatings.
引用
收藏
页码：259 / 262
页数：4
相关论文
共 50 条
  • [21] Microstructure and sliding wear behavior of Fe-Al coating produced by high velocity arc spraying
    Zhu, ZX
    Xu, BS
    Ma, SN
    Zhang, W
    Du, ZY
    CONTRIBUTIONS OF SURFACE ENGINEERING TO MODERN MANUFACTURING AND REMANUFACTURING, 2002, : 174 - 177
  • [22] Al2O3 reinforced Fe-Al composite coatings prepared by double glow discharge technique
    Wang, C.
    Lin, Y. B.
    Guo, X. Z.
    Tao, J.
    SURFACE ENGINEERING, 2013, 29 (08) : 572 - 579
  • [23] Erosion corrosion of thermally sprayed Fe12Cr and Cr3C2-NiCr coatings
    Hjörnhede, A
    Olefjord, I
    HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 5, PTS 1 AND 2, 2001, 369-3 : 507 - 514
  • [24] The microstructure and high temperature sliding wear behavior of Fe-Al coating produced by high velocity arc spraying
    Xu, BS
    Zhu, ZX
    Zhang, W
    Ma, SN
    Thermal Spray 2004: Advances in Technology and Application, Proceedings, 2004, : 1052 - 1055
  • [25] TiC–Cr3C2–WC–NiCr–Mo–C Cermet Plasma Coatings
    V. I. Kalita
    A. A. Radyuk
    D. I. Komlev
    A. B. Mikhailova
    A. V. Alpatov
    D. D. Titov
    Inorganic Materials: Applied Research, 2021, 12 : 1378 - 1385
  • [26] Hydrothermal Deposition of C/MoS2 on Electrospark Fe-Al Coatings for AISI 304 Stainless Steel
    Burkov, Alexander
    Chigrin, Pavel
    Kulik, Maria
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2019, 21 (04): : 59 - 69
  • [27] Quadratic regression orthogonal experimental study on coatings of high velocity arc spray FeCrNi/Al2O3 composite material
    Chen Xuerong
    Hu Junzhi
    Ma Shining
    Proceedings of the First International Conference on Maintenance Engineering, 2006, : 785 - 790
  • [28] Effect of heat treatment on the wear behavior of WC-Ni-Cr and WC-Ni-Cr + Cr3C2 coatings fabricated by high-velocity oxy-fuel method
    Se Young Hong
    Sahn Nahm
    Yoon Suk Oh
    Journal of the Korean Ceramic Society, 2022, 59 : 465 - 472
  • [29] Effect of Cr3C2 Addition on Thermal Wear Resistant Performance of High Velocity Oxygen Fuel Sprayed Nickel-based Alloy Coating on 45 Steel Substrate
    Su Y.
    Zhang Z.
    Qiu X.
    Liu J.
    Shen N.
    Liu S.
    Cailiao Daobao/Materials Review, 2018, 32 (03): : 899 - 904and923
  • [30] INVESTIGATION ON MICROSTRUCTURE AND TRIBOLOGICAL PROPERITIES OF CORED WIRE ARC SPRAYED Al/Al 2 O3 COATINGS
    Y.L.Zhu
    ActaMetallurgicaSinica(EnglishLetters), 1999, (05) : 988 - 994
12345