Experimental investigation on hydrogen production by methanol steam reforming in a novel multichannel micro packed bed reformer

A novel multichannel micro packed bed reactor with bifurcation inlet manifold and rectangular outlet manifold was developed to improve the methanol steam reforming performance in this study. The commercial CuO/ZnO/Al2O3 catalyst particles were directly packed in the reactor. The flow distribution uniformity in the reactor was optimized numerically. Experiments were conducted to study the influences of steam to carbon molar ratio (S/C), weight hourly space velocity (WHSV), reactor operating temperature (T) and catalyst particle size on the methanol conversion rate, H-2 production rate, CO concentration in the reformate, and CO2 selectivity. The results show that increase of the S/C and T, as well as decrease of the WHSV and catalyst particle size, both enhance the methanol conversion. The CO concentration decreases as the S/C and WHSV increase as well as the T and catalyst particle size decrease. Moreover, T plays a more important role on the methanol steam reforming performance than WHSV and S/C. The impacts on CO concentration become insignificant when the S/C is higher than 1.3, WHSV is larger than 1.34 h(-1) and T is lower than 275 degrees C. A long term stability test of this reactor was also performed for 36 h and achieved high methanol conversion rate above 94.04% and low CO concentration less than 1.05% under specific operating conditions. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.