Preparation and properties of long chain based polyacrylate latex

The long carbon chain monomer modified polyacrylate latex was successfully prepared by semi-continuous seeded emulsion polymerization. In this work, methyl methacrylate and butyl acrylate were used as main monomers; stearyl acrylate was used as functional monomer, which were emulsified with the novel mixed surfactants of disodium laureth sulfosuccinate (AEMES) and alkylphenol ethoxylates (OP-10) and initiated with 2,2 '-azobis (2-methyl propion- amidine) dihydrochloride initiator. The structure of the resultant latex was characterized by Fourier transform infrared spectroscopy. The differential scanning calorimetry, thermogravimetric analysis and contact angle were used to test the properties of the latex film. The particle size of the latex was measured by the Zetatrac dynamic light scattering detector. Factors, which have an influence on the properties of the latex and its film, have been investigated in detail. Results show that the optimal condition of synthesizing the latex is as follows: the amount of emulsifiers is 4%; the mass ratio of AEMES to OP-10 is 3:1; the amount of initiator is 0.7%; the content of SA is 6%.